Panasonic PT LB50NTU, Руководство по эксплуатации

Страница: 42 / 72

42-E
NGLISH
DETAILED SETUP
You can adjust the picture quality of
the projected images in detail. Press
the ENTER button to display the
“DETAILED SETUP” menu.
WHITE BALANCE
RED/GREEN/BLUE
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colourised.
To make the selected colour lighter:
I button
To make the selected colour stronger:
H button
NOTE:
B
“AI” is disabled when “LAMP
POWER” is set to “ECO-
MODE”. (Refer to page 50.)
NOTE:
B “AUTO” may not function
correctly if any objects are
placed on the projector.
B “AUTO” will be disabled when
“INSTALLATION” in the
“OPTION” menu is set to
“REAR/DESK” or
“REAR/CEILING”.
AI
ON
The lamp is controlled according to
the input signals to project images
with the best quality.
OFF
“AI” is disabled.
DAYLIGHT VIEW
This adjusts the vividness of the
projected images when the projector
is used under bright lighting.
AUTO
The vividness of the projected
images will be adjusted according to
the lighting condition of the room.
OFF
“DAYLIGHT VIEW” is disabled.
NOTE:
B sRGB is only enabled when
RGB signals are being input
(when “LAMP POWER” is set
to “STANDARD”, “AI” is set to
“OFF”, and “DAYLIGHT VIEW”
is set to “OFF”).