Panasonic PT-LB355U, Руководство по эксплуатации, Страница: 73 / 115

ENGLISH - 73
f
Refer to “Setting the remote control ID numbers” (
x
page 45) for how to set the ID number on the remote control.
[Factory default]
Return various setting values to their factory default settings.
1) Press
as
to select [Factory default].
2) Press the <ENTER> button.
f
The [Return to Factory default?] screen is displayed.
3) Press
as
to select [Yes] and then press the <ENTER> button.
f
The [OK?] screen is displayed.
4) Press
as
to select [Yes] and then press the <ENTER> button.
f
The [Please wait] message will appear, and resetting operation will start, and after completing the operation, the
[Please wait] message will disappear.
Attention
f
After executing the [Factory default], be sure to turn off the projector (
x
page 37), disconnect the power plug from the wall
outlet, and then turn on the projector in order to reflect the initial setting values.
Note
f
The PIN code, logo PIN code, [Logo select] setting, user logo, lamp usage time and filter usage time will not return to the
factory default settings even if [Factory default] is executed.
Chapter 4 Settings - [Expand] menu