Panasonic PT-LB305, Руководство по эксплуатации, Страница: 39 / 119

ENGLISH - 39
Powering on/off
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the <AC IN> terminal of the projector body to prevent it
from being removed easily.
For details of power cord handling, refer to “Read this first!” (
x
page 4).
Attaching
1) Check the shapes of the <AC IN> terminal on the back of the projector body and the power cord
connector and insert the connector completely in the correct direction.
Removing
1) Confirm that the projector is in standby mode, and remove the power plug from the outlet.
2) Remove the power cord connector from the <AC IN> terminal.
Power indicator
The power indicator <ON(G)/STANDBY(R)> informs you the status of the power. Confirm the status of the power indicator
<ON(G)/STANDBY(R)> before operating the projector.
Power indicator <ON(G)/STANDBY(R)>
Indicator status Status
No illumination The power plug is not connected to the outlet.
Red
Lighting The projector is turned off. (In standby mode)
Blinking
The projector is preparing to project.
The projector will project image after a while.
The projector is preparing to be switched off.
The power is switched off after a while. (Changes to the standby mode.)
Green
Lighting Projecting.
Blinking The luminous lamp is turned off. The [Expand] menu → [Power management] is set to [Ready].
Orange
Lighting
Internal malfunction is detected. For details, refer to “Power/Warning Indicators”. ( Æ page 97)
Blinking
x
Chapter 3 Basic Operations - Powering on/off