50-E
NGLISH
CHANGE TEXT
The setup letters which will be
displayed when TEXT DISPLAY is
set to “ON” can be changed.
Press the ENTER button to display
the CHANGE TEXT screen.
#
Use the
F
,
G
,
I
and
H
buttons
to select the characters, then
press the ENTER button.
(You can enter 20 characters
continuously.)
<Editing Items>
←
Moves cursor to left.
→
Moves cursor to right.
DELETE
Deletes a letter on the cursor.
ALL DELETE
Deletes all the letters.
$
Use the
F
,
G
,
I
and
H
buttons
to select “OK”, then press the
ENTER button.
C
Select “CANCEL” to cancel the
change.
TEXT DISPLAY
The setup letters can be displayed
at the bottom of the projected image
while an image is projected.
ON
TEXT DISPLAY is enabled.
OFF
TEXT DISPLAY is disabled.
０ １ ２ Ａ Ｅ Ｉ Ｍ Ｑ Ｕ Ｙ ！ ％ ） − ？
'
３ ４ ５ Ｂ Ｆ Ｊ Ｎ Ｒ Ｖ Ｚ
＆ ＊ ： ［ ｛
６ ７ ８ Ｃ Ｇ Ｋ Ｏ Ｓ Ｗ ／ ＃
＋ ； ｜
９ ． ＿ Ｄ Ｈ Ｌ Ｐ Ｔ Ｘ ＠ ＄ （ ， ＜ ］ ｝
ａ ｂ ｃ ｄ ｅ ｆ ｇ ｈ ｉ ｊ ｋ ｌ ｍ ＝ ＾ 〜
ｎ ｏ ｐ ｑ ｒ ｓ ｔ ｕ ｖ ｗ ｘ ｙ ｚ ＞ ＿
← → DELETE ALL DELETE
OK CANCEL
Ｐａｎａｓｏｎｉｃ
ａｎａｓｏｎｉｃ
NOTE:
B
The entered password will
appear as . It will not be
displayed on the screen.
B
If you enter the wrong
password, the letters
“PASSWORD” and “NEW” will
become red. Enter the correct
password again.
Cursor
Editing items
Above: Setting before change
Below: Setting after change
