24-E
NGLISH
Press the input select button to select the
input signal.
B
A picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
Press the AUTO SETUP button to initiate
automatic positioning.
B
The tilt of the projector and the input
signal will be detected and keystone
distortion and the position of the
image will be corrected.
(Refer to page 27 for details.)
Adjusting the size
B
Turn the zoom ring to adjust the size of the projected image.
Adjusting the focus
B
Turn the focus ring to adjust the focus of the projected image.
AUTO SETUP
Input select
buttons
PT-L735NTE
only
Changing
signals
VIDEO
S-VIDEO
RGB1
RGB2
&
'
)
*
(
Adjusting the angle
B
While pressing the adjuster buttons,
adjust the forward/back angle of tilt
of the projector. Adjust so that the
projector is as vertical to the screen
as possible.
RGB1
RGB2
NETWORK
SDCARD
RGB
VIDEO
RGB
