Panasonic PT-JX200F, Руководство по эксплуатации

Страница: 70 / 145

Chapter 4 Settings — [SETUP] menu
70 - ENGLISH
g
Setting [STANDBY MODE] to [ECO] or [NETWORK]
g
Setting the [SETUP] menu → [DATE AND TIME] → [ADJUST CLOCK] → [NTP SYNCHRONIZATION] to [ON]
Refer to “Setting the date and time automatically” (
x
page 73) for details.
g
Setting the input to signage
[INITIAL STARTUP]
Set the startup method when the circuit breaker is turned on or when the plug of the power cord is connected to
an outlet.
1) Press
as
to select [INITIAL STARTUP].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[LAST MEMORY]
Starts up the projector in a status before turning off the circuit breaker or disconnecting the plug of the
power cord from the outlet.
[STANDBY] Starts up the projector in standby.
[ON] Starts projecting immediately.
[STARTUP INPUT SELECT]
Set the input when the projector is turned on to start projection.
1) Press
as
to select [STARTUP INPUT SELECT].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[LAST USED] Keeps the input that has been selected the last time.
[HDMI] Sets the input to HDMI.
[MIRRORING]
Sets the input to MIRRORING.
[Panasonic APPLICATION] Sets the input to Panasonic APPLICATION.
[MEMORY VIEWER] Sets the input to Memory Viewer.
[SIGNAGE] Sets the input to signage.
Note
f
If [POWER] of the restart option is enabled in “Setting the restart option” (
x
page 67) which explains the [SETUP] menu → [SIGNAGE],
the input switches to signage regardless of the [STARTUP INPUT SELECT] setting, as the signage playback (schedule) restarts at the same
time when the power is turned on.
[AUDIO SETTING]
Set detailed audio functions.
Adjusting the volume
1) Press
as
to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press
as
to select [VOLUME].
4) Press
qw
to adjust the level.
Operation Adjustment Range of adjustment
Press
w
. Increases the volume.
0 - 63
Press
q
.
Decreases the volume.
Adjusting the right/left audio balance
1) Press
as
to select [AUDIO SETTING].