22
Connecting with Wireless LAN
You can configure settings when the wireless module (ET-WM200E/ET-WM200U) is mounted.
Projector settings
Turn on the projector and press the <NETWORK> button on the remote control.
1
Press the menu button to open the [NETWORK] menu, and then select from among
2
[USER1] through [USER3] for [WIRELESS LAN] and press <ENTER>.
In the configuration of wireless LAN, set [DHCP
3
w_
], [IP ADDRESS
_
],
[SUBNET MASK
w_
], [DEFAULT GATEWAY
w_
], [SSID
w_
], [MODE], [AUTHENTICATION],
[ENCRYPTION], and [CHANNEL].
For details, see “USER settings” of “WIRELESS LAN” (See page 11).
“Glossary” (
_
See page
44 – 45)
Wireless LAN and wired LAN cannot be used in the same segment.
•
When multiple devices are connected, a unique IP address must be allocated to each device.
•
SSID has to be entered in alphanumeric letters.
•
You cannot set “any” or “ANY” for SSID.
•
The following settings are set before the projector leaves the factory.
•
DHCP
OFF
IP ADDRESS
192.168.11.100
SUBNET MASK
255.255.255.0
DEFAULT GATEWAY
192.168.11.1
SSID
Panasonic Projector
MODE
AD HOC
AUTHENTICATION
OPEN
ENCRYPTION
NONE
CHANNEL
11
Connecting with Wired LAN
Computer operation
Connection can be made with wired LAN. However, confirm to your system administrator on network settings
before changing any settings.
Turn on the computer.
1
Make the network setting according to your system administrator.
2
If the projector settings are the default settings (See page 1
0), the computer can be used with the following
network settings.
IP ADDRESS
192.168.10.101
SUBNET MASK
255.255.255.0
DEFAULT GATEWAY
192.168.10.1
