10
NETWORK menu (continued)
WIRED LAN
You can make detailed wired LAN settings.
Press ▲▼ to select [WIRED LAN], and press <ENTER> button.
1
The [WIRED DETAILED SETUP] screen will be displayed.
WIRED DETAILED SETUP
CANCEL
SELECT
OK
CANCEL
ENTER
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
192.168. 10.100
OFF
192.168. 10. 1
255.255.255. 0
Press ▲▼ to select an item, and change the setting according to the instructions.
2
DHCP
_
(DHCP client function)
ON:
If a DHCP server exists in the network to which the
projector is connected, the IP address will automatically be
acquired.
OFF:
If a DHCP server does not exist in the network to which the
projector is connected, additionally set [IP ADDRESS
_
],
[SUBNET MASK
_
] and [DEFAULT GATEWAY
_
].
IP ADDRESS
_
(Display of IP address and setting)
Enter the IP address if DHCP server is not used.
SUBNET MASK
_
(Displaying and setting the subnet mask)
If not using a DHCP server, enter the subnet mask.
DEFAULT GATEWAY
_w
(Display of gateway address and setting)
Enter the gateway address if DHCP server is not used.
“Glossary” (
_
See page
44 – 45)
Press ▲▼◄► to select [OK], and press <ENTER> button.
3
Save the current network settings.
Before using the DHCP server, make sure the DHCP server is already functioning.
•
For details of IP address, subnet mask, and gateway, ask the network administrator.
•
A wired LAN and wireless LAN cannot be used in the same segment.
•
w
w
Default wired LAN settings
The following settings are set before the projector leaves the factory.
DHCP
OFF
IP ADDRESS
192.168.10.100
SUBNET MASK
255.255.255.0
DEFAULT GATEWAY
192.168.10.1
