DISPLAY OPTION menu
E
NGLISH - 41
Settings
You can switch the logo on/off that is displayed when
starting up the projector. Press
I
H
to select the
required option.
STARTUP LOGO
will be displayed for
30 seconds.
ON
Active
OFF
Deactive
USER
Display the original text
Q
Editing the original text
If you select
USER
, you can display the 2 lines of
original text up to 40 characters in 1 line instead of
the logo.
1. Select
USER
and press
ENTER
.
2. Select the required line to enter or edit the original
text, and press the
ENTER
button.
3. Enter the characters and repeat until finish the line.
Use
F
G
I
H
to specify the location of the required
character, and press the
ENTER
button.
Move the cursor to
ALL DELETE
and press the
ENTER
button to delete all the entered text line.
Press the
DEFAULT
button to delete the last entered
character or indicated with the cursor in the text line.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press
G
to select a character.
4. Select
OK
and press the
ENTER
button to set the
entered text in a box.
Press
G
and edit the
TEXT2
if you need to, and
repeat the step 3.
You can turn off the
AUTO SETUP
button function for
when the
COMPUTER
signal is detected.
AUTO
When the projector detects a
COMPUTER
or
DVI
signal, adjust
the projected image position
automatically for
SHIFT
,
SIGNAL
SEARCH
,
DOT CLOCK
and
CLOCK
PHASE
.
BUTTON
Only when the
AUTO SETUP
button
is pressed, the projected image
position will be adjusted for
DOT
CLOCK
and
CLOCK PHASE
. See
“Remote control” on page 16.
You can turn off the auto signal detecting system.
ON
Detect the input signal from the
terminals and project the image.
OFF
Deactive
You can choose a
BLUE
or
BLACK
screen for when the
projector is idle. Press
I
H
to select the required option.
When projecting WIDE signals, switch to
ON
to display
the image in well adjusted size.
AUTO
Automatic detective system
OFF
For 4:3 signals
ON
For WIDE signals
(16:9, 16:10 and 15:9)
You can switch the projection mode between
SXGA+
and
SXGA
for SXGA signals. Press
I
H
to select the
required option.
SXGA
Smaller setting
SXGA+
Larger setting
STARTUP LOGO
OK
CANCEL
ALL DELETE
TEXT CHANGE
AUTO SETUP
NOTE:
• Usually the recommended setting is
AUTO
.
SIGNAL SEARCH
NOTE:
•
SIGNAL SEARCH
is not available when any input
signal is projecting.
• Usually the recommended setting is
ON
.
BACK COLOR
WIDE MODE
SXGA MODE
Содержание PT-FW300E
Страница 5: ...Important Safety Notice ENGLISH 5 Important Information ...
Страница 65: ......
Страница 66: ...Printed in Japan S0908 3019D ...