Auto Cleaning Robot
Panasonic’s Auto Cleaning Robot automatically cleans the air filter to
help keep the projector running smoothly. When the projector is
switched on,*
1
the robot uses a brush to clear away any dust adhering
to the filter, helping to prevent clogs that can impair operation or
cause malfunctions. The projector can be used for around 2,000 hours
before the filter needs to be cleaned, making it a good choice for
installation in tight spaces or for ceiling-mounted applications. Also,
the Micro-Cut Air Filter traps particles as small as 10 microns.*
2
This
greatly reduces the amount of dust entering the projector, helping
maintain high brightness and stable operation.
�
Smoke Cut Filter
The optional ET-SFD100 Smoke Cut Filter
can be mounted in place of the Auto
Cleaning Robot’s tray. This optional
smoke filter must be used when using
the projector at events where smoke or
fog is dispersed.
A Host of Functions to Assure Stable, Long-Time Operation
Adapts to a Variety of Environments
High Reliability & Stability
Air filter
ACR brush
*
1
Cleaning time can be set by a timer from 00:00 to 23:50 in 10-minute intervals, or
controlled manually. The cleaning process is done only once per 24 hours. When the set
time is reached, the cleaning process will begin if the projector is on or in cooling mode.
*
2
Such as lint particles and pollen.
Liquid Cooling System
This advanced system uses a pump to circulate a cooling liquid behind
the DLP
®
chips to absorb heat. This Panasonic’s technology is made
possible by the reflective nature of the DLP
®
system, which enables
an airtight chip structure that minimizes image-quality loss due to
dust adherence. In addition, it allows operation within a wide ambient
temperature range of 32°F (0°C) to 113°F (45°C)*
3
and reduces
operating noise to 43 dB.*
4
*
3
The operating temperature range is 32°F (0°C) to 104°F (40°C) when used in High-Altitude
mode (4,593 feet [1,400 m] to 8,858 feet [2,700 m]). Also, if the ambient temperature
exceeds 104°F (40°C) (95°F [35°C] in High-Altitude mode) when using all four lamps, the
light output may be reduced approximately 30% to protect the projector.
*
4
Average value at time products are shipped from the factory, in accordance with JIS X
6911:2003 data projector specifications. Measurement methods and conditions are based
on Article 2 of JIS X 6911:2003 data projector specifications.
DLP
®
chip
(Green)
Reservoir tank
Reservoir tank
Radiator
�
PJLink™ Compatibility
The LAN terminals support PJLink™ class 1 connection.
Control with the same specifications is also possible when
used in a multi-projector system with projectors of another brand.
�
Multi Projector Monitoring & Control Software
Panasonic’s original “Multi Projector
Monitoring & Control”* freeware
allows the user to control and monitor
multiple projectors at the same time
via LAN. When a problem occurs, an
alarm message is sent to the
monitoring/controlling PC.
* Available in June 2008. Please consult a sales
representative if necessary.
�
Web Browser Control
The PT-DZ12000U can be easily operated remotely over a LAN
network, because it is all done using the computer’s familiar web
browser. Furthermore, the projector sends an e-mail message to
notify the operator when an
error has occurred, or a lamp
needs to be replaced.
PC
PC
PC
PC
PC
Remote control
Internet
LAN
LAN
PT-DZ12000U
Network Function
Universal Design
Optional accessories
Geometric Adjustment
This function enables adjustment of images for projection onto
spherical, cylindrical and other specially shaped screens. You can
make the adjustment easily using just the remote control, with no
external equipment needed. Used together with the multi-screen
support system, the Geometric Adjustment expands your application
possibilities, letting you create a wide range of image effects at
concerts, performances and other special events.
• Edge blending
The edges of adjacent screens can be blended and their luminance controlled. For example, the
adjoining edges in a 2-screen system can be blended to create a smooth, seamless image.
• Color matching
When several units are used together, this function corrects for slight variations in the color reproduction
range of individual projectors. The PC software assures easy, accurate control. Independent, 7-axis adjustment
(red, green, blue, yellow, magenta, cyan, white) ensures high precision colors and minimizes color variations.
• Multi-screen processor
The PT-DZ12000U can project large, multi-screen images without any additional equipment.
Up to 100 units (10 x 10) can be edge-blended at a time.
* Image uniformity over the entire screen may be adversely affected by the type of screen used or the
lamp mode selected. Also, due to differences in the manner in which the lamp brightness decreases
with time, some fluctuation may appear in overall screen brightness. When this occurs, the unit must
be readjusted, which is a service that is offered for a fee.
For details, please contact the store where you purchased the product, or a sales representative.
Excellent System Functions
Lens Shift
The optical axis can be adjusted both vertically and horizontally by a
remote control, giving you greater setup ease and flexibility.
Small Size and 120-VAC Convenience
Despite its 12,000-lumen power, the projector is compact, weighs only
77.1 lbs (35 kg) and runs on ordinary 120-VAC power. This makes it
easy to add to existing facilities and suitable for use at concerts,
performances, and other events.
A Wide Selection of Lenses
Choose from a wide lineup of lenses for your system,
including short-throw, long-throw zoom and
fixed-throw lenses for rear projection use. The
additional lenses make it easy to adapt your
projector to the installation site. The lens cover opens
completely for easier mounting.
Built-in Multi-screen Support System
Multiple Terminal Including DVI-D and LAN Slot
The PT-DZ12000U comes equipped with DVI-D and LAN (PJ-Link™)
slots. It also features an array of terminals, including two RGB inputs
and D-sub HD 15-pin, a 5-BNC connector, serial in/out, S-video input,
two remote inputs, and one remote out. In addition to offering DVI-D
control, the PT-DZ12000U is
HDCP*-compliant and thus
meets a broad range of
projection needs.
* High-Bandwidth Digital Content Protection
Other Features
•Mechanical lens shutter
•Picture in picture (The picture in picture function cannot be used with
some input signals and selected inputs.)
•Anti-theft features with chain opening
•ID assignment for up to 64 units
•Built-in test pattern
•Selectable 9-language on-screen menu (English, German, French,
Spanish, Italian, Russian, Japanese, Chinese, Korean)
Lamp LED Indicator and Self-Diagnosis Function
The projector body is equipped with a temperature alarm LED and a
burnt-lamp alarm LED (for lamps 1 to 4). In the PT-DZ12000U, the
LEDs are visible from both front and top, so you can see it easily even
if the unit is hung from the ceiling. Information
on the error is also given in the on-screen
display. A self-diagnosis function is also
provided. Error codes displayed on the 3-digit,
7-segment LED on the side of the projector tell
the operator what the problem is.
Made in Japan
PT-DZ12000U projector is carefully manufactured at the Panasonic
factory in Japan under strict quality control. This is another very
important advantage of Panasonic projectors.
Ecological-conscious design
Panasonic works from every angle to minimize environmental impact in the product
design, production and delivery processes, and in the performance of the product during
its life cycle. The PT-DZ12000U reflects the following ecological considerations.
•Lead-free solder is used to mount components to the printed circuit boards.
•Lamp power switching further reduces power consumption.
•Auto Power Save activates standby mode when no signal is input.
In response to the increasing trend toward large-screen
image viewing, the PT-DZ12000U features native WUXGA
resolution to completely cover full-HD specifications. It is
further equipped with a Detail Clarity Processor based on
Panasonic’s imaging technology. Together with its superb
brightness of 12,000 lumens, it ensures sharp, lifelike,
large-screen images. This system projector also promises
solid reliability, thanks to the combination of the DLP
®
system, which is resistant to image degradation over time,
and a 4-lamp optical system.
High brightness:
12,000 lumens
High resolution:
WUXGA
1,920 x 1,200 pixels
�
Easy Lamp Replacement
Removing a single screw is all it takes to
open the rear cover. This makes it easy to
replace a lamp while the projector is still
in the mounting bracket – a big advantage
in tight ceiling-mounted installations.
�
Remote Control with Blind Touch Operation
Contoured surfaces let you operate the control keys by touch.
Connection terminals and controls are illuminated by LEDs, and
the remote control is fully backlit for sure, easy operation in the
dark. The wireless remote control has a range of 98.4 feets (30 m),
so you can control the projector from a good distance.
�
4 Direction Grip
Grooves on all four sides of the projector’s bottom let you get a firm,
comfortable grip on the unit so that it can be moved safely.
A 3-Chip DLP
®
Projector with WUXGA Resolution
Goes Beyond Full-HD Expectations and Superb
12,000 Lumens of Brightness
Color matching
Edge blending
With
edge blending
Without
edge blending
Overlapping image edges
Zoom lens
ET-D75LE6 (0.9 - 1.1:1)
ET-D75LE1 (1.4 - 1.8:1)
ET-D75LE2 (1.8 - 2.8:1)
ET-D75LE3 (2.8 - 4.6:1)
ET-D75LE4 (4.6 - 7.4:1)
ET-D75LE8 (7.3 - 13.8:1)
ET-PFD100
ET-HAD100
Fixed focus lens
ET-D75LE5 (0.7:1)
Lens
Frame
Carrying handle
Ceiling mount bracket
Smoke Cut Filter
Input signal board
ET-D75LE1
SD-SDI input signal board
ET-MD77SD1
HD/SD-SDI input signal board
ET-MD77SD3
DVI-D input signal board
ET-MD77DV
Dual link HD/HD-SDI input
signal board
ET-MD100SD4
Lamp
Replacement lamp unit
ET-LAD12K
ET-LAD12KF (four pack)
High-ceiling
mount bracket
ET-PKD100H
Low-ceiling
mount bracket
ET-PKD100S
ET-SFD100
ET-PKD100H
ET-PKD100S
1
3
4
Image showing various Geometric Adjustments
DLP
®
chip
(Blue)
PT-DZ12000U
