S
P
E
C
F
I
L
E
PT-
DW530
DLP
™
Projector
As of May 2011
SFD10M013-1
3 / 1 4
RGB 2 IN
R, G, B
Y, P
B
, P
R
(Y, C
B
, C
R
)
VIDEO IN
S-VIDEO IN
AUDIO IN 1
AUDIO IN 2
AUDIO IN 3
AUDIO OUT
SERIAL IN
REMOTE IN
LAN
WIRELESS MODULE
Power cord length
Cabinet materials
Dimensions (W × H × D)
Weight
Operating temperature
Operating humidity
Remote control unit
Power supply
Operation range*
5
Dimensions (W × H × D)
Weight
Supplied accessories
Optional accessories
Replacement lamp unit
Ceiling mount bracket
Wireless module
D-sub HD 15-pin × 1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative)
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), P
B
/P
R
(C
B
/C
R
): 0.7 Vp-p, 75 ohms
BNC × 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin × 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
RCA × 2 (L, R × 1), 0.5 Vrms
M3 × 1 (L, R × 1), 0.5 Vrms
M3 × 1 (L, R × 1), 0.5 Vrms
M3 × 1 (L, R × 1) (monitor out: 0 – 2.0 Vrms, variable)
D-sub 9-pin × 1 for external control (RS-232C compliant)
D-sub 9-pin × 1 for external control (parallel)
RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant
with PJLink™
Connector for optional wireless module ET-WM200U/WM200E × 1
3.0 m (9 ft 10 in)
Molded plastic (PC + ABS)
332 mm × 168 mm*
3
× 484.5 mm*
4
(13-1/16˝ × 6-5/8˝ *
3
× 19-1/16˝ *
4
)
Approx. 8.5 kg (18.7 lbs)
0°–45°C (32°–113°F)
20%– 80% (no condensation)
3 V DC (R6/LR6/AA type battery × 2)
Approx. 15 m (49 ft 3 in) when operated from directly in front of the
signal receptor
48 × 163 × 24.5 mm (1-13/32˝ × 6-5/8˝ × 31/32˝)
Approx. 117 g (4.1 oz) (including batteries)
Power cord with security lock (× 1)
Wireless remote control unit (× 1)
Batteries for remote control (R6/LR6/AA type × 2)
Wire rope (× 1)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
and Control Software Ver. 2, Wireless Manager ME 5.5) (× 1)
ET-LAD60A
ET-LAD60AW (Twin Pack)
ET-PKD110H (for high ceilings)
ET-PKD110S (for low ceilings)
ET-WM200U (for North America)
ET-WM200E (for Europe and Asia)
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
*1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate. Also, only certain com-
mands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 Compliant with VESA CVT-RB.
*4 With legs at shortest position.
*5 Including the lens.
*6 Operation range differs depending on environments.
*7 The operation system must be pre-installed at the factory or clean installed.