background image

46

Using the RGB REALITY mode

The RGB REALITY mode is a mode for converting RGB (primary color) input signals to component signals,
performing high picture quality playback using image conversion processing specially for moving pictures.
You can choose the RGB mode best suited for the type of RGB signals you are using (refer to page 40):
RGB mode:  Choose this mode when the RGB signal source is a PC or other computer-based device that focuses

on still images.

RGB REALITY mode:  Choose this mode when the RGB signal source is a scan converter or other video 

equipment that focuses on moving images.

Signal name

480i

576i

480p

720/60p

1035/60i

1080/60i

1080/24p

1080/50i

1080/30p

1080/25p

1080/24sF

Except above list

fH(kHz)/fV(Hz)

15.73/60

15.63/50

31.47/60

45.00/60

33.75/60

33.75/60

27.00/24

28.12/50

33.75/30

28.12/25

27.00/48

RGB mode












RGB REALITY mode












×

Remarks

RGB mode only

◎:

Compatible (factory default)

○:

Compatible (when you apply the RGB Reality mode to the signal formats marked with 

,

       select the signal format with the SYSTEM SELECTOR button, and then register it with the 

       projector’s memory.)

△:

These signal formats may not be compatible with RGB mode depending on

      

signal conditions. Use the RGB Reality mode.

×:

Not compatible

The following lists the video signal formats compatible with the RGB Reality mode:

• In the RGB REALITY mode, optimum adjustment values are pre-set, so it is not possible to automatically adjust

the picture (pages 47, 48) or the input signal resolution (page 49).

• When in RGB REALITY mode, all of the projector’s adjustments provide the same functions as those for the 

YP

B

P

R

(or YC

b

C

r

) input.

NOTE

Содержание PT-D9510U





































































































Отзывы: