PICTURE menu
E
NGLISH - 25
Adjusting the
3)
OUTPUT
level.
To adjust the
OUTPUT
level from the present
setting, press ▲ ▼ continuously until it reaches to
your desired level.
It can move up and down but cannot be set beyond
the adjacent points.
Ex. Press ▲ in the
Y ADJUST
menu and move
the selected point upward.
RESET
Y ADJUST
POINT
INPUT
0%
50%
50%
+10
5
100%
INPUT
OU
TP
UT
OUTPUT
MOVE
UP
RESET
Y ADJUST
POINT
INPUT
0%
50%
50%
+30
5
100%
INPUT
OU
TP
UT
OUTPUT
Changing the adjustment by different color types.
4)
To switch to a different color
ADJUST
menu, press
the
ENTER
button continuously until it reaches your
desired color
ADJUST
menu.
Y ADJUST
R ADJUST
B ADJUST
G ADJUST
You can also switch each different color
ADJUST
menu through the
GAMMA ADJUSTMENT
menu.
Select your required color
ADJUST
(
Y ADJUST
,
R ADJUST
,
G ADJUST
,
B ADJUST
) with ▲ ▼ in
the
GAMMA ADJUSTMENT
menu and press the
ENTER
button.
ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT
Y ADJUST
R ADJUST
G ADJUST
B ADJUST
INITIALIZE
ADVANCED
5
GAMMA ADJUSTMENT
ENTER
RETURN
SELECT
RESET
R ADJUST
POINT
INPUT
0%
50%
50%
+10
5
100%
INPUT
OU
TP
UT
OUTPUT
Setting the
5)
OUTPUT
levels back to the default
setting.
To set the
OUTPUT
level on the selected point
back to the default setting “0”, press the
DEFAULT
button on the remote control.
NOTE:
Individual
•
INPUT
levels cannot be set back to their
default settings by pressing the
DEFAULT
button.
Please press ◄ ► to move back themselves if needed.
In the
•
Y ADJUST
menu, if you press the
DEFAULT
button, all
Y
/
R
/
G
/
B
output settings will go back to the
default setting “0”.
Adjustable range depends on the input signal.
•
