PICTURE menu
E
NGLISH - 29
Saving a log setting as a profile
Return to the
COLOUR MANAGEMENT
menu
and save the stored log as a profile. Make sure
that the
PICTURE MODE
is not switched.
Select the
1.
PROFILE SAVE
menu and press the
ENTER
button.
The
PROFILE SAVE
menu is displayed. You can
save the profile as
USER1
,
USER2
and
USER3
.
Indicated with
is in use, and is empty.
USER1
USER2
USER3
Press the
2.
ENTER
button to save the profile.
The confirmation screen is displayed. Press the
ENTER
button again to save.
Name the profile.
3.
Use ▲ ▼ ◄ ► to specify the location of the required
character to enter and press the
ENTER
button.
You can enter up to 14 characters.
OK
CANCEL
ALL DELETE
PROFILE NAME INPUT
Repeat step 3 until you finish the text line.
4.
Move cursor to
ALL DELETE
and press the
ENTER
button to delete all the entered text line.
Press the
DEFAULT
button to delete the last entered
character or indicated with cursor in the text box.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press ▼ then perform step 3.
Select
5.
OK
and press the
ENTER
button to set the
entered text as a name.
Press the
ENTER
button without entering any text to
keep the default name.
Deleting the saved profiles
You can delete the profiles from
PROFILE
DELETE
menu.
Select
1.
PROFILE DELETE
and press the
ENTER
button.
Press ▲ ▼ to select the required profile or
2.
PROFILE
ALL DELETE
and press the
ENTER
button.
The confirmation screen will be displayed and select
OK
.
Press the
3.
ENTER
button.
Changing the profile names
You can change the name of the profiles from the
PROFILE NAME CHANGE
menu.
Press ▲ ▼ to select
1.
PROFILE NAME CHANGE
and press the
ENTER
button.
Press ▲ ▼ to select the required profile and press
2.
the
ENTER
button.
Rename the profile.
3.
Use ▲ ▼ ◄ ► to specify the location of the required
character to enter and press the
ENTER
button.
Select
4.
OK
and press the
ENTER
button to set the
entered text as a name.
Loading saved profiles
When profiles are loaded under the
PICTURE
MODE
setting, you can keep them as you defined
until the
PROFILE
is set to
NORMAL
.
Select the required
1.
PICTURE MODE
and press
the
ENTER
button.
Press the
2.
COLOUR MANAGEMENT
button and
select the
PROFILE
menu.
The profile settings of the selected
PICTURE MODE
will be displayed.
Select the required profile and press the
3.
ENTER
button.
NORMAL
Return to the default setting of the
PICTURE MODE
menu.
USER1
Defined profile settings.
USER2
USER3
NOTE:
In the
•
CURSOR
mode, you can adjust the colours
except white, gray and black.
In the
•
CURSOR
mode, if you adjust the exact same
colour differently, both will affect each other and you
might get unexpected results.
COLOUR MANAGEMENT
•
will be unable to adjust with
the setting of
COLOUR1
in
PICTURE MODE
, when
HDMI signal is selected.
If there is another area, which has an exact same or
•
similar colour with your target in the same screen, all
colours will be adjusted as well.
If you switch the input signal before you save the
•
profile, the setting will be cancelled without notice.
J
x.v.Colour
You can switch on/off the automatic adjustment
system for signals which comply with International
Standard xvYCC.
ON:
Active
OFF:
Deactive
NOTE:
x.v.Colour
•
adjustment system is available only with
HDMI
signals in
COLOUR1
of
PICTURE MODE
menu.
