background image

Projecting an image

12 - 

E

NGLISH

Projecting an image

Selecting the input signal

Switch on the connected devices.

1. 

Press the play button of the required device.

 

 

Press the 

2. 

INPUT SELECT

 button to select the 

required input method if needed. See “Switching 

the input signal” on page 15.

The image will be projected on the screen.

 

 

NOTE:

AUTO SEARCH

 •

 is 

ON

 as default and the signal from 

the connected devices is detected automatically. See 

“AUTO SEARCH” on page 39.

Positioning the image

Adjust the projected image with the lens shift dials. 

1. 

See “Lens shift and positioning” on page 6.

Adjust the angle of the projector.

2. 

Screw the front leg adjusters up/down and adjust the 

 

 

angle vertically.

See “Front leg adjusters and throwing angle” on 

 

 

page 5.

Adjust the focus and the projected image size.

3. 

Press +/− of the 

 

 

FOCUS

 and 

ZOOM

 buttons to 

adjust.

Press the 

 

 

LENS

 button to adjust the focus and zoom 

by the remote control. See “LENS CONTROL” on 

page 35.

NOTE:

Do not touch the air exhaust port as this may cause 

 •

burns or injury.

If keystone distortion occurs, see “KEYSTONE” on 

 •

page 34.

If you adjust the focus, you may need to adjust the size 

 •

of the image by pressing the 

ZOOM

 button again.

Содержание PT-AE4000



















































Отзывы: