manualshive.com logo in svg

Panasonic PT-AE3000E, Руководство по эксплуатации

Поделиться
Скачать
Panasonic PT-AE3000E Скачать руководство пользователя страница 19

E

NGLISH - 19

Basic O

p

eration

Switching the projector on/off

J

Connecting

1. Make sure the shape of the mains plug and the 

AC IN

 terminal on the back of the projector match, 

then push the plug all the way in.

2. Align the side of the power cord secure lock with 

the side guide rail of the 

AC IN

 terminal of the 

projector and slide it in.

3. Place the latch to the latch catcher and press until 

it clicks.

4. Connect the mains lead to a mains socket.

J

Disconnecting

1. Unplug the mains lead from the mains socket.
2. Depress the latch and slide the cover off.

3. Slide the power cord secure lock up along the side 

guide rail and remove.

4. Hold the plug and unplug the mains lead from the 

AC IN

 terminal on the back of the projector.

Mains lead

Rail guide

Latch

Latch

Rail guide

NOTE:

• Do not use other than the provided mains lead.
• Ensure all the input devices are connected and turned off before connecting the mains lead.
• Do not force the connector as this may damage the projector and/or the mains lead.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.

Содержание PT-AE3000E





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды