Panasonic PT-51HX42CF, Руководство по обслуживанию

Страница: 20 / 144

- 20 -
Service Manual
480i Service mode (electronic controls)
Note: Registers marked as FIXED are factory preset,
the default value must not be changed
Important note:
Write down the original values (“b” in the
adjustment mode details, figure 16) for each
address adjustment before modifying values.
Follow the procedure below to access the various
service adjustments. (Same procedures applies to
each section.)
a. Press
CH buttons on the remote control to select any of
the seven service sub adjustment addresses. (“a” in
figure 16)
b. Press
The buttons on the remote control to adjust the
level of the selected service adjustments.
MTS Adjustments Description Default Level New Level
MTSIN INPUT LEVEL 25
SEPAL LOW LEVEL SEPARATION 08
SEPAH HIGH LEVEL SEPARATION 19
CLOCK Adjustments Description Default Level New Level
CLOCK CLOCK 128
VIDEO Adjustments Description Default Level New Level
COLOR COLOR 27
TINT TINT 7F
BRIGHT SUB-BRIGHTNESS 01 F0
CONT SUB-CONTRAST BE
B-Y_G MAGENTA TINT ADJ 26
R-Y_A YELLOW TINT ADJ 7A
CUT R RED CUT-OFF 02 1B
CUT B BLUE CUT-OFF 02 48
R DR RED DRIVE 4D
B DR BLUE DRIVE 30
I ABL ABL VARIABLE
C_OFF COLOR ADJ. CUT-OFF 00
HDEF Adjustments Description Default Level New Level
H POS HORIZONTAL POSITIONING 01 48
H WID HORIZONTAL WIDTH 19
PCC PINCUSHION CORRECTION 1B
EWCOR CORNER CORRECTION 03
EWTRA TRAPEZOID 08
HCORR HORIZONTAL CORRECTION 0F