24
Turning the Power ON and OFF
Always be sure to follow the procedure given below to
turn the Projection Display power ON and OFF.
The lamp cooling fan will continue to operate for
approximately 3 minutes after the power is turned off. During
this time, the POWER indicator will blink Red.
Do not disconnect the power cord from the outlet
and do not open the circuit breaker (unless
necessary) while the cooling fan is still operating. Do
not disconnect the power cord from the power outlet
while the power indicator blinks Red.
•
POWER indicator
POWER button
POWER indicator
POWER button
Power ON / OFF
Notes
If the POWER button is accidentally turned off during use,
after power is turned back on, it may take a short period
before the lamp automatically comes on.
This unit consumes approx. 0.4 W in OFF condition when
plugged into an AC outlet.
Power ON
Press POWER on Projection Display or Remote Control
to turn power on.
The Power Indicator blinks Green for about 10 seconds and
then turns solid Green.
Picture display may be delayed when the unit has not been
used for a long time or ambient temperature is low.
The fan rotating sound may be increased in high temperature
condition.
Power OFF
Press POWER on Projection Display or Remote Control
to turn power off.
Power shuts off after a Black Screen is displayed for about
3 minutes. If the POWER button is pressed during the Black
Screen display, Power is turned back on.
The Power Indicator blinks Red for about 3 minutes and then
LED turns off.
•
•
•
•
•
•
•
The Power Indicator
LED
ACTION
Off
Power – OFF
Red (blinking)
Power – OFF (Now cooling)
Green
Power – ON
Green (blinking) Power – ON (Preparing to light lamp)
The Power Indicator
LED
ACTION
Off
Power – OFF
Red (blinking)
Power – OFF (Now cooling)
Green
Power – ON
Green (blinking) Power – ON (Preparing to light lamp)
Auto shut off
If “No signal shut-off” has been selected “Set”, the TV will
automatically turn off if NO SIGNAL is present for more
than 10 minutes. (p. 54-55)
If “No action shut-off” has been selected “Set”, the TV will
automatically turn off if no key has been pressed for more
than 3 hours. (p. 54-55)
•
•
Auto shut off
If “No signal shut-off” has been selected “Set”, the TV will
automatically turn off if NO SIGNAL is present for more
than 10 minutes. (p. 54-55)
If “No action shut-off” has been selected “Set”, the TV will
automatically turn off if no key has been pressed for more
than 3 hours. (p. 54-55)
•
•
