Panasonic ProLine AG-1340P, Руководство по обслуживанию

Страница: 45 / 84

Fig. S5
d. Rotate Main Cam Gear to the clockwise in order to eject
the cassette tape.
1.3.4. CYLINDER UNIT REPLACEMENT
1. CYLINDER UNIT REPLACEMENT
a. Remove the Mechanism unit from MAIN C.B.A./Chassis
by referring “Disassembly Procedure”.
b. Remove the 3 screws (A) of the CYLINDER UNIT with
a screw driver.
c. Unlock the 4 locking tabs (B) and disconnect the
Cylinder flexible card from the FPC Holder.
d. Remove the CYLINDER UNIT.
CAUTION
Handle the Cylinder flexible card with care. When it
damaged, you should replace whole Cylinder unit.
Fig. S6
2. UPPER CYLINDER DISASSEMBLY
a. Remove 2 screws (A).
b. Remove the Cylinder Stator Unit.
c. Remove 2 screws (B).
d. Remove the Cylinder Rotor Unit.
e. Loose Hex screw (C) (1.5 mm) and remove the
CYLINDER RETAINER.
f. Remove the Upper Cylinder.
Fig. S7
3. UPPER CYLINDER ASSEMBLY
When reassembling, perform the steps in the reverse order.
Notes:
a. Install the Cylinder Retainer so that the 2 holes on top of
the Cylinder Retainer are at right angles with the P5001
Connection.
b. Tighten the Hex screw (C) (1.5 mm) while pressing
down on top of the Cylinder Retainer.
9
AG-1340P