Panasonic PN290496-NZ, Руководство по установке

Страница: 14 / 24

14
Part Names and Functions 2
Table1. Ports and Port LED lamps 1 to 6 correspond as shown below.
Communication LED (Left)
PoE LED (Right)
Port LED
Communication LED
(Left)
PoE LED
(Right)
Display mode
STATUS/ECO
Behavior Description
Green Light
Green Blink
Orange Light
Off
10G Green Light
Off
Green Light
Orange Blink
Off
LOOP HISTORY Green Light
Off
It is shut off via the loop detection
and shutoff function/storm control or
the BPDU guard.
PoE are being supplied power.
Power is not being supplied, or the
PoE receiving equipment are not
connected.
Also, it is set in the ECO mode.
Single port overload.
Also, an overload of the Ethernet Switch
occurs, and the ports are displayed
which cannot be supplied power.
No device connected or the ECO mode is set.
Orange Blink It is sending and receiving just the
control packet.
Link is established.
Transmitting and receiving data.
Link is established at 10 Gbps.
Link is established at 5 Gbps, 2.5 Gbps, 1000 Mbps
or 100 Mbps, or no device is connected.
5G Green Light
Off Link is established at 5 Gbps.
Link is established at 10 Gbps, 2.5 Gbps, 1000 Mbps
or 100 Mbps, or no device is connected.
2.5G Green Light
Off Link is established at 2.5 Gbps.
Link is established at 10 Gbps, 5 Gbps, 1000 Mbps
or 100 Mbps, or no device is connected.
1G Green Light
Off Link is established at 1000 Mbps.
Link is established at 10 Gbps, 5 Gbps, 2.5 Gbps
or 100 Mbps, or no device is connected.
No loop detection history.
Loop has been detected within the last 3 days.