background image

Product Outline

Switch-M8eG is an all Giga bit Ethernet switching hub equipped with eight 
10BASE-T/100BASE-TX/1000BASE-T ports and one SFP extension slot with a 
management function.

1.1 Features

7

1

 

Fanless design solves noise problem or fan failure.

 

Has a loop detection function, which notifies when a loop occurs with the 
corresponding port LED and automatically shuts down the looped port.
In addition, when a port is shut down and when it automatically recovers, an SNMP 
trap can be sent to notify the administrator.

 

Has a loop detection history function, which notifies when a loop occurs with the 
corresponding LED and enables a network administrator to identify the looped port 
after the loop is removed.

 

Embedded power saving mode detects the connection status automatically and 
saves power consumption to minimum.

 

Use of LED indicator switching button saves power consumption of LED lamps.

 

Ports 1 to 8 are auto negotiation-ready 10/100/1000BASE-T ports. Their speed and 
communication mode can be changed by configuration.

  Port 9 can be exclusively used as an SFP extension slot. 

 

All twisted pair ports support straight/cross cable auto sensing function. Simply 
connect devices with straight cables, whether it is a terminal or a network device.

  (This function does not work if the port communication configuration is set at Fixed 

or Link Aggregation. Ports 1 to 7 are set at MDI-X. (default))

 

VLAN function allows free grouping of up to 256 VLANs.

 

The IEEE802.1p compatible QoS function is supported.

 

Has an Internet Mansion function, which ensures security between each door.

 

Has a port grouping function, which groups ports that are allowed to communicate 
with one another to limit communications between different groups.

 

Equipped with energy efficient Ethernet (EEE) conforming to IEEE802.3az (LPI). 
When there is no data transmission at link up, the energy-saving state automatically 
starts so that power consumption can be reduced on each port.

 

The IEEE802.1X compatible user authentication function (EAP-MD5/TLS/PEAP) is 
supported.

Содержание PN28080K-TH




















Отзывы: