Panasonic PN28080i-ID, Руководство по эксплуатации

Страница: 67 / 94

67
3.2.15. Loop Detection Config
Select "Advanced Config" and "Loop Detection" and then "Loop Detection Config"
to open the screen shown in Figure 3-40. On this screen, you can configure the
Loop detection and blocking function settings.
Figure 3-40 Loop Detection Config
Screen Description
Global Loop Detec
-
tion Status
Displays the status of the Loop detection and blocking function.
Enable Enables the Loop detection and blocking function.
Disable Disables the Loop detection and blocking function.
Target Port Select
-
ing
Select multiple target ports for configuring settings at a time.
Click the "Select All" button, and all ports will be selected.
Click the "Reset" button, and all ports will be deselected.
Click the "Set selected port (s) " button after selecting and changing the items
for configuring settings at a time, and the same settings will apply to the
selected ports.
Port Number Displays the port number.
Link Displays the link status.
Up
The link has been established successfully.
Down The link has not been established.
Status Displays the status of the Loop detection and blocking function for that port.
Forwarding
Sending packets normally.
Loop Detect Detecting a loop and blocking a port.