Panasonic PN28080i-ID, Руководство по эксплуатации

Страница: 38 / 94

38
3.1.15. Telnet Access Limit
Select "Basic Config" and "System Security" and then "Telnet Access Limit" to open
the screen shown in Figure 3-15. On this screen, you can configure limitation of
equipment accessing this switch via Telnet.
Figure 3-15 Telnet Access Limit
Screen Description
Telnet Access
Limitation Displays the IPv4 Telnet access limit.
"Disable" is the factory default setting.
Enable
Enables the Telnet access limitation.
Disable Disables the Telnet access limitation.
IPv6
Telnet Access
Limitation Displays the IPv6 Telnet access limit.
"Disable" is the factory default setting.
Enable
Enables the Telnet access limitation.
Disable Disables the Telnet access limitation.
Number This is the entry number for the Telnet access limit.
IP Address
/Subnet Mask Displays the information on accessible IPv4 networks to be added.
There is no factory default setting. "0" is displayed for all of IPv4 Addresses and
Subnet Masks.
IPv6 Address
/Prefix Length Displays the information on accessible IPv6 networks to be added.
There is no factory default setting. "::" is displayed for all of IPv6 Addresses and
Subnet Masks.