Panasonic PN25249 Скачать руководство пользователя страница 6

Страница: 6 / 76

Basic Instructions for the Use of This Product

●For inspection and/or repair, consult the retailer.

●Use commercial power supply from a wall socket, which is close and easily

accessible to this Switching Hub.

●Unplug the power cord when installing or moving this Switching Hub.

●Unplug the power cord when cleaning this Switching Hub.

●Use this Switching Hub within the specifications. Deviation could lead to mal

function.

●Be sure to confirm that this Switching Hub does not move or fall under the

weight of the cables when mounting with magnets. Connect cables while hold

ing the Switching Hub down.

●Securely attach this Switching Hub to the wall with screws when mounting it in

a high location.When mounting this Switching Hub with magnets in a high loca

tion, a fall of the Switching Hub could lead to injury and/or equipment failure.

●Do not place a floppy disk or magnetic card near the magnet. Deviation could

lead to corruption of the data.

●Do not move this Switching Hub when attached to the desk. Deviation could

lead to scratches on the painted surface.

●Do not touch the metal terminal of the RJ45 connector, the modular plug of

connected twisted pair cable. Do not place charged objects in the proximity of
them. Static electricity could lead to equipment failure.

●Do not put the modular plug of the connected twisted pair cable on objects that

can carry static charge, such as carpet. Do not place it in the proximity. Static
electricity could lead to equipment failure.

●Do not put a strong shock, including dropping, to this Switching Hub. Deviation

could lead to equipment failure.

●Before connecting a console cable to the console port, discharge static electric

ity, for example by touching metal appliance (do not discharge by touching this
Switching Hub).

Содержание PN25249













































































Результаты поиска

Содержание PN25249

Отзывы:

Похожие инструкции для PN25249

Бренды по названию

Популярные бренды

Panasonic PN25249, Руководство по эксплуатации

Результаты поиска

Содержание PN25249

Отзывы:

Похожие инструкции для PN25249

Бренды по названию

Популярные бренды