56
3.2.17. Loop Detection Config
Select "Advanced Config" and "Loop Detection" and then "Loop Detection Config"
to open the screen shown in Figure 3-37. On this screen, you can configure addi
-
tional settings.
Figure 3-37 Loop Detection Config
Screen Description
Global Loop Detec
-
tion Status
Displays the status of the Global Loop Detection function.
Enable
Enables Global Loop Detection.
Disable
Disables Global Loop Detection.
Loop Detect Status
Enables/disables the loop detection function for ports.
Recovery Status
Enables/disables recovery when a loop is detected in a port.
Recover Timer
Enters the time until recovery when a loop is detected in a port.
The factory default setting is 60 seconds.
Содержание PN25249
Страница 41: ...41 Note Administrative packets such as Ping and ARP transmitted by this Switching Hub cannot be captured ...
Страница 50: ...50 Figure 3 30 PoE Schedule Config Daily Figure 3 31 PoE Schedule Config Weekly ...
Страница 51: ...51 Figure 3 32 PoE Schedule Config Monthly Figure 3 33 PoE Schedule Config DateList ...
