Panasonic PI-HRA081A, Руководство по эксплуатации

Страница: 10 / 62

3
Installation Guide
Check
When user receives product, please check all items according to list.
Hard Disk Installation
Installation Preparation
Need to prepare a cross screwdriver. This series of NVR can be installed in the
case and the largest capacity of hard disk could be up-to 10TB.
Installation Steps
Disconnect the power from the NVR before installing a hard disk drive (HDD).
Factory recommended HDD should be used for this installation.
Step 1: Remove the cover from the NVR by unfastening the screws on the back
and side.
Step 2: Install 4 screws on HDD.
Step 3: Install HDD in the HDD rack using the provided screws.
Step 4: Turn over the machine and fasten the screws on the button to fix the
HDD.
Step 5: Connect the power cable and SATA cable.
Host Operation
Shutdown & Login Operation
Shutdown
【
Enter Menu
】
→
【
logout
】
→
【
Shutdown
】
→
【
OK
】
.
(Note: It is advisable to use this method for shutdown to avoid any damage to the
device.)
Note: Turn off the power before changing the hard disk.
Power Off Recovery
If power supply of device is cut off or forced off when network video recorder is in