Panasonic Panafax UF-585, Руководство по обслуживанию

Страница: 199 / 310

199
6.2.5 Picture Quality Control Circuit
This circuit consists of a recording picture control standard cell IC2 [DZAC000157 or ”PEGASUS”] , an interpolation table ROM
(IC3), line memory for interpolating (SRAM) and its peripheral circuitry.
The recording picture control standard cell (IC2) inputs the parallel data from the system bus, conducts picture quality correction
(smoothing), reduction, synchronization control, etc., then sends this data to the printer. These functions are as follows:
Picture quality correction circuit (smoothing)
Compares the picture element with 15 surrounding picture elements, determines the interpolation data from the interpolation
data ROM, and smooths out diagonal lines, etc., on the recorded picture.
Image range isolation circuit
Identifies the halftone picture range and controls smoothing to eliminate blotching of the recording picture which has undergone
error diffusion or other processing.
Reduction circuit
This circuit is used to process the received data so that it fits on the recording paper, according to the Fax Parameter settings.
Synchronization control circuit
This circuit is used to synchronize the output recorded data with the horizontal synchronizing output signal from the printer f or
each line. Within a line, it is synchronized with the dot clock signal. The dot clock signal is provided by dividing the crystal
oscillator frequency from the Extend Generator Circuit (16 MHz) by 5.
Smoothing
Process
Circuit
Timing
Generator
Circuit
Scanning LSI
[IC17 (IC7)]
Laser Printer I/F
CPU Bus
Horizontal
Sync
Circuit
Scanning
Synchronization
Circuit
Register
(IC2)
Address Address
Control Signal Control Signal
System
Bus
I/F
RAM
I/F
Line
Memory
16 MHz
Crystal
Oscillator
Smoothing
Data
ROM
[IC3]
Recording Picture Process Circuit
Block Diagram
UF-595 (UF-585)
Control Signal
Address
Address
Address
Data
Data
Data Bus