Programming or Retrieving Parameters via Email
59
Ins
ta
ll
ing Y
our
Mac
h
in
e
This feature provides a convenient and an easy way to Update, Backup or Restore the Phone Book data
right from your PC by sending a text email message to your machine.
Your machine interprets the command that you enter in the "Subject" line of your email message and
performs one of the following functions, it Retrieves or Stores data into the Auto Dialer (Phone Book).
The two types of commands that can be entered in the "Subject" line of your email:
NOTE
1. To activate this feature, change the Fax Parameter No. 158 (PC REMOTE UPDATE) to "Valid".
(See page 82)
Using a PC to Update the Auto Dialer Remotely
1) To Store
data, type
:
#set abbr(password)#
: where the "password" is the Remote Password programmed in
your machine's User Parameters (i.e. 123456789).
You can program any known unused Auto Dialer location(s)
with this command for the first time, without having to Retrieve
the Phone Book data first. If the desired Auto Dialer location
already contains data, your machine will overwrite the existing
data, therefore, we recommend that you use the Retrieve
command below instead.
To edit existing Auto Dialer locations, refer to pages 65 to 66.
2) To Retrieve
data, type
:
#get abbr(123456789)#
