Assembling the Electronic Board
5
Eng
lish
3
Collapse the carton box.
Remove the tape and the staples on
the unopened side of the carton box,
then collapse the box.
4
Remove the protective plastic bags.
Remove the protective plastic bag
from the screen unit and printer unit.
Set those units on the top of collapsed
shipping box and remove the
cushions.
Caution
• Touch the screen film surface gently to avoid
any damage.
5
Attach the screen unit to the
optional stand or wall mounting
fixture.
■
If you are using the stand, refer to
page 13.
■
If you are using the wall mounting
fixture, refer to page 17.
6
Hang the screen unit to the board
attachment (upper).
Hold the side covers of the screen unit
and hang two hooks of the screen unit
on the left side of the board
attachment (upper).
Shift the screen unit to the left until it
stops. Confirm the left hook is inserted
into the groove of the board
attachment (upper).
• When hanging the screen unit, set the board
attachment frame at the lowest level.
• Be careful not to catch the screen film on the
board attachment frame.
7
Remove the shipping screws.
Remove the lower and upper shipping
screws on the folded screen.
Caution
• Remove the lower shipping screw first.
Carton
Top
Bottom
Remove the tape
and the staples.
Protective
plastic bag
Screen unit
Cushions
Cushions
Cover (left)
Board attachment
(upper)
Cover (right)
Board
attachment
Frame
