PAN1326C2 Bluetooth Module
4 Setting up the Demo
Quick Start Guide Rev. 1.0
Page 15 of 20
4.5
Setting up “SPP (Bluetooth Classic)“
This chapter explains how to set up the demo
“SPP” which is based on Bluetooth Classic.
The following requirements must be met:
✓
The demo is loaded
✓
The evaluation board is connected
4.2 Connecting the Evaluation Board
✓
The code is flashed
Setting the Evaluation Board as Server
1. Download a Serial termi
nal program. In this guide “PuTTY“ is used.
2. Open the terminal program and select the connection type
Serial
.
3. Set the assigned COM port to the evaluation board (in this case
“COM4”) and set the
speed to
115
200 kBit/s
.
4. Enter
Server
in the prompt
Choose Mode>
(1) to set the evaluation board as server.
5. Entering
Open 1
in the prompt
Server>
(2) to open a server port.
You can replace “1” with any number between 1 and 30, if there is no
server open on that port.
➔
The evaluation board is set as server.