PAN1326C2 Bluetooth Module
4 Setting up the Demo
Quick Start Guide Rev. 1.0
Page 11 of 20
4
Setting up the Demo
Two different demos can be set up:
•
“
iBeacon
” which is based on Bluetooth Low Energy.
•
“
SPP
“ which is based on Bluetooth Classic.
This chapter explains how to set up the demos:
•
“
iBeacon
(Bluetooth Low Energy
)” by using Panasonic development kit and receive
beacon data in app.
•
“
SPP
(Bluetooth Classic
)” by using Panasonic development kit and transmit strings from
terminal to application via PAN1326C2.
To set up the demo, the following steps must be done:
1.
2.
4.2 Connecting the Evaluation Board
3.
4. For
the demo “
iBeacon
(Bluetooth Low Energy)
” please refer to
“iBeacon (Bluetooth Low Energy)”
for the demo “
SPP
(Bluetooth Classic)
” please refer to
4.1 Loading the Demo
1. Go to
C:\ti\Connectivity\CC256X BT\CC256x MSP432 Bluetopia
SDK\v4.2.1.1\Samples\XXXX
and load the demo (
iBeaconDemo
or
SPPDemo
).
2. Click the tab
Project
>
Properties
.
