background image

* Due to printing irregularities, actual shades may vary slightly from the illustration.

Colors of Speakers

When choosing speakers, it is important to consider the strucutre 

or wood quality of the building or the interior. 

As much as possible, Panasonic speakers have been designed 

to harmonize with a variety of interiors.   

Because building interiors tend to be predominantly white,

we have used it as the standard underlying tone.   

To accentuate the mood of your interior,

simply choose the most appropriate shade.

Power Amplifier & Mixer Integrated System

DESIGN HANDBOOK

DISTRIBUTED BY:

• All TV pictures are simulated. 
• Weights and dimensions are approximate. 
• Specifications are subject to change without notice. 
• These products may be subject to export control regulations.  

Trademarks and registered trademarks

– Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. 
– SD logo is a trademark. 

Important

– Safety Precaution: carefully read the operating instructions and installation manual before using this product.

http://panasonic.net/pss/pa/

Printed in Japan (1N-775B)

WS-2330N
WS-2335N
WS-2360N

WT-7015N

WT-610N
WT-615N
WT-H500N
WT-H600N

WS-TN05N
WS-TN06N

Ivory White

(Munsell 2.1Y7.7/1)

Light Gray 

(Munsell N7)

Integrated White

(Munsell 10Y9/1)

Off White 

(Munsell 5Y8.5/1)

Содержание PAMIS WA-BA240N










































Отзывы: