18
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).
Camera Recording
1
Set POWER to
CAMERA.
2
Press MENU
for
MENU mode.
Press UP or DOWN
to select
STAND-BY RELEASE
.
3
Press DISPLAY
to select ON/OFF.
ON :
From Stand-by mode, press
RECORD/PAUSE twice to
resume recording.
OFF :
From Stand-by mode, set
POWER to OFF, then to
CAMERA. Press RECORD/
PAUSE to record.
4
Press MENU
to exit.
Stand-by Quick Release
If left in RECORD/PAUSE mode for 5
minutes, the Camcorder switches to Stand-by
mode to conserve battery power. When set to
ON, Stand-by Quick Release lets you resume
recording by pressing RECORD/PAUSE
twice. The default setting from the factory is
OFF mode.
a
Press RECORD/PAUSE to stop
recording.
b
Set POWER to OFF
and leave cassette
in Camcorder.
c
To resume recording,
set POWER to
CAMERA.
d
Press RECORD/PAUSE
to resume
recording.
Note:
• Use Manual Easy Edit (left) if more than 24
hours has passed before recording was
resumed.
Manual Easy Editing
For a smooth transition between scenes if
recording is stopped, and then started within
24 hours.
For proper continuity when taping from
Stop mode or after attaching a new
Battery.
Easy Edit Stand-by
A
Set POWER to VCR.
B
a
Press REWIND/SEARCH
to rewind
a few seconds of tape.
b
Press PLAY
to review recording.
c
Press STILL
at the point where you
will want to continue the recording.
C
Set POWER to CAMERA.
D
Press RECORD/PAUSE
to resume
recording.
2
,
3
,
4
B
b
1
,
b
,
c
,
A
,
C
a
,
d
,
D
a
c
