Record mode
34
LSQT0975
ª
To record still pictures clearly
≥
When zooming in on the subject with a
magnification of
4
k
or higher, it is difficult to
reduce the slight shaking from holding the
Camcorder by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
≥
When recording still pictures, hold the
Camcorder firmly with your hands and keep
your arms stationary at your side so as not to
shake the Camcorder.
≥
You can record stable pictures without shaking
by using a tripod and the remote control.
≥
For the number of still pictures to be recorded
on a card, refer to
-86-
.
≥
The moving picture and sound cannot be
recorded.
≥
While data are recorded on a card, do not
operate the mode dial.
≥
When the access lamp is lit, do not insert or
remove a card.
≥
Another product may degrade or not play back
data recorded on this Camcorder.
≥
If set [PICT.QUALITY] >> [
], mosaic-pattern
noise may appear on a playback image
depending on the picture content.
≥
When the [PICTURE SIZE] is set to other than
[
] or [
], the mega pixel recording mode
is set.
ª
On-screen display in the card
recording mode
1) Still picture size
2) Card indication (
-72-
)
3) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
4) Quality of still pictures
ª
Select the size of still pictures to be
recorded on a card
1
Set [BASIC] >> [PICTURE SIZE] >> select
the desired picture size.
ASPECT [16:9]:
:
2288
k
1288
:
640
k
360
ASPECT [4:3]:
:
2288
k
1728
:
1600
k
1200
:
1280
k
960
:
640
k
480
≥
When you purchase this unit, [ASPECT] is set
to [16:9]. The sides of pictures recorded when
[16:9] is set may be cut at printing. Check before
printing.
ª
Select the picture quality for
photoshot images
1
Set [BASIC] >> [PICT.QUALITY] >> select
the desired picture quality.
[
]:
High picture quality
[
]:
Normal picture quality
≥
You can also change the picture quality on
[ADVANCED] >> [PICT.QUALITY] in the tape
recording mode.
ª
Recording with a shutter operation
effect
You can add a shutter operation simulating
sound.
1
Set [ADVANCED] >> [SHTR EFFECT] >>
[ON].
ª
About the shutter chance mark
≥
The shutter chance mark does not appear in
manual focus mode.
≥
When the subject is not easily focused, focus on
the subject manually.
≥
You can record still pictures on the card even if
the shutter chance mark does not appear, but
pictures may be recorded without being
focused.
≥
The shutter chance mark does not appear or
has difficulty displaying in the following cases.
≥
When the zoom magnification is high.
≥
When the Camcorder is shaken.
≥
When the subject is moving.
≥
When the subject stands in front of a light
source.
≥
When close subjects and far subjects are
included in the same scene.
≥
When the scene is dark.
≥
When there is a bright part in the scene.
≥
When the scene is filled with only horizontal
lines.
≥
When the scene lacks contrast.
0.2
0.3
M
100
100
1)
3)
4)
3
2)
3
0.2
4
M
2
M
1
M
0.3
M
LSQT0975_ENG.book 34 ページ ２００５年１２月１９日 月曜日 午前９時５１分
