Before using
26
LSQT0975
5
Move the joystick right or press it to set the
selection.
6
Move the joystick up or down in order to
select the item to be set.
7
Press the joystick to determine the setting.
ª
To exit the menu screen
Press the [MENU] button.
ª
To get back to the previous screen
Move the joystick left.
ª
About the menu setting
≥
The menu is not displayed while recording on a
tape or a card. Also, you cannot record on a
tape or a card while the menu is displayed.
ª
Operating with remote control
The menu screen transition is the same as when
the buttons on the main unit are used.
1
Press the [MENU] button.
2
Select a menu item.
≥
Use the direction buttons
(
3
,
2
,
1
,
4
) and
[ENTER] button in place of the joystick on the
main unit.
3
Press the [MENU] button to exit the menu
screen.
Adjusting LCD monitor/viewfinder
ª
Adjusting the brightness and color
level
1
Set [SETUP] >> [LCD SET] or [EVF SET] >>
[YES].
2
Move the joystick up or down in order to
select the item to be adjusted.
[LCD SET]
: Brightness of the LCD monitor
: Color level of the LCD monitor
[EVF SET]
:Brightness of the viewfinder
3
Move the joystick left or right to move the
bar indication representing the brightness.
EVF
LSQT0975_ENG.book 26 ページ ２００５年１２月１９日 月曜日 午前９時５１分
