40
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Editing Features
Video In
VHF Connecting
Cable (not
supplied)
TV
(To View)
A/V Cable
(Supplied)
To Audio In
To Video In
Recording:
VCR (Rear)
• For technical reasons, dubbing a tape
may reduce its quality.
• If the Time Code is displayed in the EVF
or LCD monitor, it cannot be reset.
• Only the DATE/TIME, when displayed,
will be recorded on the tape.
CAUTION:
Unauthorized exchanging and/or
copying of copyrighted recordings may
be copyright infringement.
A/V OUT
Source (Playing)
Palmcorder
Copying your Tapes to
VHS Cassette
Monitor with your TV
1
Insert a pre-recorded tape
into the source (playing) Palmcorder
and a blank tape, with record tab in
place, into the target VCR (Recorder).
2
Press (PLAY)
on the Palmcorder.
When the tape reaches the point you
want to start dubbing,
press PAUSE
.
3
Place the VCR into REC/PAUSE
mode.
(See VCR manual.)
4
Simultaneously, press PAUSE
on
both units to begin copying.
5
Press STOP on both units
when
copying is completed.
Audio In
Note
• Turn the TV ON and select its VCR
channel (either CH3 or CH4).
• Set the VCR/TV Selector on the
recording VCR to VCR.
Before you begin
• Connect both Palmcorder and VCR to
their power sources.
• Connect the Palmcorder to a VCR as
illustrated left.
• Turn ON both units.
• Set the recording VCR’s Input Signal
Selector to LINE.
• Set the Palmcorder POWER to VCR.
DV53.p38-41.p65
03/01/21, 16:26
40