16
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
The LCD (Liquid Crystal Display) monitor
can be used while recording.
1
Press LCD-OPEN
to unlock the LCD
monitor.
2
Swing the LCD monitor fully open
and adjust the viewing angle.
• The LCD monitor will automatically
turn on.
• When the LCD monitor is completely
closed, it will shut off automatically to
save power.
• Adjust the LCD Brightness and/or
color of the LCD monitor if necessary.
Please refer to “To adjust the LCD/
EVF BRIGHTNESS or COLOR”
below.
3
Start recording.
• Using the LCD monitor will reduce battery
operating time.
• Close the LCD monitor completely when
not in use.
Using the LCD Monitor
Note
Camera Recording
To adjust the LCD/EVF
BRIGHTNESS or COLOR
1
Press MENU
to display the main menu
screen.
2
Rotate JOG KEY
to select
LCD/EVF
SETUP
from the main menu screen.
(Menu OSD: pp. 60, 62)
3
Press JOG KEY
to display the LCD/
EVF SETUP screen.
4
Press JOG KEY
to select LCD
BRIGHTNESS, LCD COLOR, or
EVF BRIGHTNESS, then
rotate JOG
KEY
to adjust.
5
Press MENU
twice to exit this mode.
EVF/LCD
1
LCD-OPEN
180°
90°
90°
1, 5
MENU
2, 3, 4
JOG KEY
DV53.p15-19.p65
03/01/21, 16:25
16