Panasonic Palmcorder Multicam PV-GS33, Руководство по эксплуатации

Страница: 8 / 68

Before Use
-8-
Quick Guide
1
Attach the Battery to the AC Adaptor and
charge it.
≥
Before use, fully charge the Battery.
≥
Since the Battery will not be charged when
the DC Cable is connected to the AC
Adaptor, disconnect it from the AC Adaptor.
≥
The [CHARGE] Lamp lights up, and charging
starts.
≥
When the [CHARGE] Lamp goes off,
charging is completed.
2
Attach the charged Battery to the
Camcorder.
ª
Inserting a Cassette
1
Slide the [OPEN/EJECT] Lever
1
toward
the front and pull down to open the
Cassette Compartment Cover.
2
Insert a Cassette.
3
Close the Cassette Holder by pressing the
[PUSH] mark
2 .
4
Close the Cassette Compartment Cover.
OPEN / EJECT
1
PUSH
2
ª
Recording on a Tape
1
Set the [OFF/ON] Switch 1 to [ON].
≥
The [POWER] Lamp
2
lights up.
2
Set the Mode Dial to Tape Recording Mode.
3
Press the Recording Start/Stop Button.
≥
Recording starts.
4
Press the Recording Start/Stop Button
again to pause the recording.
ª
Recording a Still Picture (Photoshot)
1
Set the Mode Dial to Tape Recording Mode.
2
Press the [PHOTO SHOT] Button in the
Recording Pause Mode.
ON
OFF
1
2
POWER
PHOTO SHOT
PV-GS33PP_Eng.book 8 ページ ２００４年２月２６日 木曜日 午後５時２９分