Panasonic Omnivision PV-M2768, Руководство по обслуживанию

Страница: 11 / 151

1-9
TV Main
C.B.A.
Insulated
material
TV
It is not necessary to
connect Degaussing
Coil Connector
Main
C.B.A.
Operation I and II
C.B.A.s
Stereo Amp C.B.A.
A/V Jack
C.B.A.
CAUTION:
HOT CIRCUIT
DO NOT touch Power
circuit during service.
TV Power C.B.A.
Mechanism Chassis
and Cassette Up Ass'y
Service Position (1) Mechanism check
Mechanical adjustment
Electrical adjustment
Service Position (2)
Main C.B.A. check
TV Main C.B.A. check
Service Position Purpose
TV
Main C.B.A.
Stereo Amp
C.B.A.
Insulated
material
A/V Jack C.B.A
It is not necessary to connect
Degaussing Coil Connector
TV Main C.B.A.
TV Power
C.B.A.
Mechanism Chassis
and Cassette Up Ass'y
CAUTION:
HOT CIRCUIT
DO NOT touch Power
circuit during service.
VCR Unit
SERVICE POSITION
The Basic Service Position does not require the use of Exten-
sion Cables. However, for more extensive servicing, Exten-
sion Cables should be used.
1. Basic Service Position
Service Position (1)
1. Remove Rear Cover, VCR Unit, TV Power C.B.A., A/V
Jack C.B.A., Top Shield Plate Ass'y, and Stereo Amp
C.B.A.
2. Place VCR Unit, TV Power C.B.A., A/V Jack C.B.A., and
Stereo Amp C.B.A. as shown.
Fig. 2-1
CAUTION:
HOT CIRCUIT
(Primary circuit) exists on the Main
C.B.A., TV Main C.B.A., and TV Power C.B.A.
Use extreme care to prevent accidental shock when
servicing.
Note:
When disassembling/assembling, refer to "Disassembly/
Assembly Procedures of Cabinet" section.
Service Position (2)
1. Remove Rear Cover, VCR Unit, TV Power C.B.A., A/V
Jack C.B.A., Top Shield Plate Ass'y, and Stereo Amp
C.B.A.
2. Remove Main C.B.A., TV Main C.B.A., Operation I C.B.A.,
and Operation II C.B.A. from the frame.
3. Place Main C.B.A., TV Main C.B.A., TV Power C.B.A.,
A/V Jack C.B.A., Stereo Amp C.B.A., Operation I C.B.A.,
and Operation II C.B.A. as shown.
Fig. 2-2