Panasonic OmniVision PV-M2066, Руководство по обслуживанию

Страница: 5 / 25

-17-
DISASSEMBLY METHOD
1 Back Cover D2 7(S-1) -
2 VCR Unit D3, P354, Anode Cap,
D4 P4203, P4602, P4604,
P4605, CRT C.B.A.,
1
DeflectionYoke Connector,
Degaussing Coil Connector
3 CRT Unit D3 4(S-2) 2
4 Operation I D5 P6001, 6(L-1) -
and Operation
II C.B.A.s
5 Power Supply D6 (S-11), P1201, P801 -
Ass'y
2(L-4) 3
6 Stereo D6 P4502 -
Amp C.B.A.
7 Top Shield D6 5(S-3) -
Plate Ass'y
8 TV Main D7 P201, P202, P203, P204, 4
C.B.A. 4(L-2)
9 VCR Chassis D8 2(S-4), (S-5), (S-6), (S-12), 5
Unit Chassis Angle, (L-3)
10 VCR Main D9 (S-7), (S-8), P6002, -
C.B.A. P2501, P3501
11 Cassette Up D10 2(S-9), 2(S-10) 6
Ass'y
12 Mechanism D10 --------------------------- 7
Chassis
Step
/Loc.
No.
Part Remove Fig.
No.
1. DISASSEMBLY OF CABINET PARTS
DISASSEMBLY FLOWCHART
This flowchart indicates the disassembly steps of the cabinet
parts and the P.C. Boards in order to gain access to the item(s)
to be serviced. When reassembling, perform the step(s) in the
reverse order.
Caution : Disconnect AC Plug before disassembly.
Fig. D1
A. MECHANICAL ADJUSTMENT PROCEDURES
V. ADJUSTMENT PROCEDURES
Note
A
B
C
D
How to read chart shown above :
A : Order of steps in Procedure
When reassembling, perform the step(s) in the reverse
order.
These numbers are also used as the identification
(location) No. of parts in Figures.
B : Part to be removed or installed.
C : Fig. No. showing Procedure or Part Location.
D : Identification of part to be removed, unhooked, unlocked,
released, unplugged, unclamped, or unsoldered.
2(S-1)=2 Screws(S-1);
3(L-1)=3 Locking Tabs(L-1)
Back Cover
1
CRT
Unit 3
Operation
I and
Operation
II C.B.A.s
4
VCR Unit 2
Mechanism Chassis 12
Cassette Up Ass'y 11
VCR Main C.B.A.
Stereo
Amp
C.B.A. 6
TV Main C.B.A. 8
VCR Chassis Unit 9
Top Shield Plate Ass'y 7
Power
Supply
Ass'y 5
10