Panasonic OCU-CR1000VF8A, Руководство по обслуживанию

Страница: 21 / 29

Suction filter
1. Suction filter
to be applied
1) The
suction filter
(one is shipped with each refrigeration unit) is a standard component.
2) In the case of replacement, use the same s uction filter shown below as the standard
component.
2. Suction filter attachment
1) Do not remove the suction filter cap until immediately before use.
2) Connect the suction filter to the suction line between the refrigeration unit inlet and
the evaporator by brazing.
3) During brazing operation, protect the filter dryer from heat by covering it with wet cloths, etc.
4) Install with arrow pointing in direction of flow. Reverse flow may cause internal damage.
Refrigeration Unit
Model No.
Suction filter
Model No.
Connection
Diameter
OCU-CR1000VF8A S-008T

19.05 mm
You must not use a filter dryer for HFC refrigerant under any circumstances as it
does not meet the pressure requirement.
Caution
Cap
628 mm
21