Panasonic NV-MX500A, Руководство по обслуживанию

Страница: 4 / 116

About lead free solder (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
Caution:
- Pb free solder has a higher melting point than standard solder;
Typically the melting point is 50-70°F (30-40°C) higher. Please use
a high temperature soldering iron. In case of the soldering iron
with temperature control,please set it to 700±20°F (370±10°C).
- Pb free solder will tend to splash when heated too high (about
1100°F/ 600°C).
When soldering or unsoldering, please completely remove all of the
solder on the pins or solder area, and be sure to heat the soldering
points with the Pb free solder until it melts enough.
1.2. FEATURE COMPARISON CHART
FUNCTION EG B EN A
Card Function (Multi Media Card, SD Card)
External DV/ VIDEO Input
MPEG4 Recording
2. CAUTION FOR AC CORD (VJA0940 TYPE)
2.1. INFORMATION FOR YOUR SAFETY
IMPORTANT
Your attention is drawn to the fact that recording of pre-recorded tapes or discs or other
published or broadcast material may infringe copyright laws.
WARNING
To reduce the risk of fire or shock hazard, do not expose this
equipment to rain or moisture.
CAUTION
To reduce the risk of fire or shock hazard and annoying
interference, use the recommended accessories only.
FOR YOUR SAFETY
DO NOT REMOVE THE OUTER COVER
4