background image

26

5

6

MULTI/P-IN-P

MENU

3

1,2

4

PHOTO
SHOT

PUSH

W.B/SHUTTER/IRIS/
         VOL/JOG

4

1,2

1

2

3

4

MULTI/P-IN-P

PUSH

MENU

1

3

1,2

4

PHOTO
SHOT

W.B/SHUTTER/IRIS/
         VOL/JOG

4

ª

Picture-in-Picture Mode

You can display a sub-screen (still picture) inside the screen.

After setting [DIGITAL EFFECT] >> [EFFECT1] >> [P-IN-P]......

1

Select [P-IN-P] on the [MULTI-PICTURES] Sub-Menu and set 
the position (

1234

) where you want to insert a small still 

picture.

2

Exit the menu by pressing the [MENU] Button.

3

Aim the Movie Camera at the scene you want to capture and 
press the [P-IN-P] Button to insert a small still picture.

A small still picture is displayed in a Normal picture.

If the [P-IN-P] Button is pressed again, the small still picture is cleared.

4

Press the Recording Start/Stop Button or the [PHOTO SHOT] 
Button to record on the Cassette.

For other notes concerning this item, see page 49.

ª

Multi-Picture Mode 

Strobe Multi-Picture Mode 

5

:

You can capture and record 9 consecutive small still pictures.

Manual Multi-Picture Mode 

6

:

You can manually capture and record 9 small still pictures.

1

1

1

1

Set [DIGITAL EFFECT] >> [EFFECT 1] >> [MULTI].

2

2

2

2

Set [MULTI-PICTURES] >> [SCAN MODE] >> [STROBE] or 
[MANUAL].

       When [STROBE] is selected:

Set the [SPEED] to a desired strobe speed. At the [FAST] setting, 9 
consecutive still pictures is captured within approximately 1 second, at 
[NORMAL] within approximately 2 seconds, and at [SLOW] within 
approximately 3 seconds.

If you set [SWING] on the [MULTI-PICTURES] Sub-Menu to [ON], the 
intervals at which the 9 still pictures are taken are longer at the 
beginning and end than in the middle of the swing strobe period, and it 
is useful for analyzing swing motion,etc.,in sports.

       When [MANUAL] is selected:

You can select a desired scene one at a time up to 9 small pictures.

3

3

3

3

Press the [MULTI] Button.

If [MANUAL] is selected, press the [MULTI] Button at each scene you 
want to capture.

4

4

4

4

Press the Recording Start/Stop Button or the [PHOTO SHOT] 
Button to record on the Cassette.

Deleting all the captured Multi-Pictures

While 9 multi-pictures are displayed, press the [MULTI] Button.

If [MANUAL] has been selected, press the [MULTI] Button after 9 pictures 
are displayed.

To display the Multi-Pictures again

Press the [MULTI] Button for 1 second or longer.

To Delete Multi pictures one by one
(When pictures were captured in [MANUAL])

When the [MULTI] Button is pressed for 1 second or longer while the still 
pictures are displayed, the pictures captured last is deleted continuously.

After still pictures are deleted one by one, they cannot be displayed again.

For other notes concerning this item, see page 49.

B.book  26 ページ  2001年8月27日 月曜日 午前10時14分

Содержание NV-MX2





























































Отзывы: