17
YEAR
2001
MONTH 10
DAY 8
HOUR 14
MIN. 30
PRESS MENU TO RETURN
1, 2
1, 3
CLOCK SET
MENU
PUSH
W.B/SHUTTER/IRIS/
VOL/JOG
1
1
Setting Date and Time
Since the internal clock of the Movie Camera has a slight imprecision, make
sure to check the time before recording.
1
Set [OTHER FUNCTIONS] >> [CLOCK SET] >> [YES].
2
Press the [PUSH] Dial to select [YEAR]/[MONTH]/[DAY]/
[HOUR]/[MIN.] and turn to set it to a desired value.
≥
Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
3
Press the [MENU] Button to finish setting the date and time.
≥
The clock operation starts from [00] second.
≥
The Menu will disappear when the [MENU] Button is pressed again.
≥
If the built-in battery is weak, the [
0
] indication
1
flashes. In this case,
charge the built-in battery.
≥
The clock employs the 24-hour system.
~~~~~~~~~~~~~~~~~~~~~~~~~
Internal Lithium Battery Recharge
≥
The internal lithium battery sustains the operation of the clock. When the
[
0
] indication is lit, the internal lithium battery is near exhaustion.
1
Connect the AC adaptor to the Movie Camera with the power
turned off and then connect to the AC Mains socket.
≥
After charging for 4 hours, the built-in lithium battery can power the
clock for approximately 3 months.
.........................................................................................................................
WARNING
THE LITHIUM BATTERY IN THIS EQUIPMENT MUST ONLY BE
REPLACED BY QUALIFIED PERSONNEL. WHEN NECESSARY,
CONTACT YOUR LOCAL PANASONIC SUPPLIER.
.........................................................................................................................
~~~~~~~~~~~~~~~~~~~~~~~~~
LP Mode
A desired recording speed can be selected with [REC SPEED] on the
[RECORDING SETUP] Sub-Menu. (When recording to tape only)
If LP Mode is selected, the recording time becomes 1.5 times longer
than that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
mosaic-pattern noise may appear on a playback image, or some normal
functions may be restricted.
≥
The contents that are recorded in LP Mode are not completely compatible
with other equipment.
≥
Audio dubbing is not possible with LP Mode.
(
l
32)
~~~~~~~~~~~~~~~~~~~~~~~~~
Audio Recording Mode
The sound quality of the recorded sound can be selected with [AUDIO REC]
on the [RECORDING SETUP] Sub-Menu.
High sound-quality recording is possible with “16 bit 48 kHz 2 track” Mode.
With the “12 bit 32 kHz 4 track” Mode, the original sound can be recorded on
2 tracks in stereo, while the other 2 tracks can be used for Audio Dubbing.
B.book 17 ページ ２００１年８月２７日 月曜日 午前１０時１４分
