8
Manual Tuning Procedure
1 Press [MENU]
to display the Main menu on the TV
screen.
2 Press [Cursor]
34
) to select [TUNER PRESET]
then press [OK]
3 Press [Cursor]
34
) to select [CH] then select the
channel number you want to tune by pressing [Cursor]
21
).
4 Confirm that [CLEAR] is set to [OFF].
5 Press [Cursor]
34
) to select [SEARCH] then
press [Cursor]
(
21
) to start the Manual Tuning.
• If the desired TV station has not been tuned, press
21
) again.
• Press [MENU]
and repeat steps
3
-
5
for each
programme position you want to tune to a station.
6 Press [MENU]
three times to exit the On Screen
Display.
Direct Tuning
Follow steps
1
to
3
of
4 Confirm that [CLEAR] is set to [OFF].
5 Press [Cursor]
34
) select [SEARCH].
6 Press [Numeric]
to enter the number of the desired
programme position.
• For other channels that require tuning, repeat steps
3
-
6
.
7 Press [MENU]
twice to exit the On Screen Display.
Fine Tuning Procedure
Follow steps
1
to
3
of
4 Press [Cursor]
34
) to select [FINE] then press
21
) to obtain the best tuning condition.
• Press [OK]
to return the tuning to its former state.
5 Press [MENU]
to exit the On Screen Display.
Blanking of Unused Programme Positions
Follow steps
1
to
3
of
4 Press [Cursor]
34
) to select [CLEAR] then
press [Cursor]
(
21
) to select [ON].
• Repeat steps
3
-
4
for other unused programme positions
to skip during the selection of programme positions.
• To cancel the blanking of a programme position select
that programme position then set [CLEAR] to [OFF].
5 Press [MENU]
twice to exit the On Screen Display.
Setting the Clock of Your VCR
In the event of a power failure, the clock will operate on its
back up system for a minimum of 3 years. After 3 years, clock
back up in the event of a power failure can only be
guaranteed for maximum of 1 hour.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
• Example:
Date;
16 October, 2005
Time;
20:15
Operations
1 Press [MENU]
to display
the Main menu on the TV
screen.
2 Press [Cursor]
34
) to
select [CLOCK SET] then press
[OK]
.
3 Set each item by pressing
341
). Press
2
) to return to
the previous item.
At the set time (H:M) point:
• When it is kept pressed, the
indication changes in 30 minute
steps.
• There is no need to press
(
1
).
4 Press [MENU]
• The clock starts.
Time Reset Function
If the clock is less than two minutes slow or fast, it can easily
be reset to the proper time.
Example:
Resetting the clock to 12:00.00
1 Press [MENU]
to display the Main menu on the TV
screen.
2 Press [Cursor]
34
) to select [CLOCK SET] then
press [OK]
.
3 When the current clock displays on the VCR is
between 11:58.00 and 12:01.59, press [MENU]
soon as you hear the 12:00.00 signal. This resets the
time to 12:00.00.
CH 2
END: MENU
CH 2
SEARCH 74
END: MENU
SEARCH
CH 2
AFC: OK
FINE
:
END: MENU
M
1
Y
2005
D
1
H:M
0:00
CLOCK SET
START:MENU
SELECT:
MENU
SELECT
END
: , OK
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
MENU
SELECT
END
: , OK
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
NV‑MV40GL.book 8 ページ ２００３年２月２６日 水曜日 午後５時１１分
