Panasonic NV-MV40GL Скачать руководство пользователя страница 18

Страница: 18 / 24

Search Functions

Jet Navigator

This VCR can display a list of the recorded programmes on
the inserted video cassette on the TV screen. You can then
select the desired programme, and the VCR will quickly locate
its beginning and start playback.
Conditions for correct operation of the Jet Navigator function:
• The tape length of the inserted cassette must be set

correctly. (See page 10.)

• The VCR must not be in the timer recording standby mode.
• A programme at least 15 minutes must be recorded on the

tape.

Preparations

• Display the VCR picture on the TV.
• Be sure to set [JET NAVIGATOR] to [ON] (see page 10) and

perform recording.

Operations
1 Press [NAVI]

(4)

to display the

Jet Navigator list.

• Up to 14 programme data that

have been recorded are
displayed on the Jet Navigator
list.
(7 programme data for each page)

• When more than 15 programs have been recorded in one

cassette, the programme data are deleted from the first
one.

• When pressing [NAVI]

(4)

during playback, playback

stops and the Jet Navigator list appears.

2 Press [NAVI]

(4)

several times to select the

programme that you want to locate and play back.
After more than 3 seconds, the VCR starts to search
for the beginning of the selected programme and
playback starts automatically.

• Every time you press [NAVI]

(4)

the programme shifts above.

• If, after playback has started, you

want to search for the beginning
of the same or another
programme, press [NAVI]

(4)

Playback stops and the Jet
Navigator list appears.

To Cancel the Jet Navigator list:

Press [MENU]

(7)

To Set the Category

The category setting allows you to
find what kind of programmes are
recorded by the character and the
icon indications.

1 Press [Cursor]

(37)

(

) while

the Jet Navigator list appears.
Then, select the desired
category by pressing [Cursor]

(37)

(

3421

2 Press [MENU]

(7)

To Delete the Jet Navigator Data of a Single Video
Cassette Tape:

Keep [CANCEL]

(15)

pressed for more than 5 seconds while

the Jet Navigator list appears.
[

] appears on the list.

See page 10 on the way to delete all the Jet Navigator data
stored in the VCR memory.

Notes:

• The Jet Navigator list is stored in each cassette.
• Signals approximately 10 seconds before and after the

current tape position are checked. (During this checking,
[CHECKING JET NAVIGATOR DATA.] is displayed on the
TV screen.)

• Checking cannot be performed properly when signals are

attempted to be checked at portions of the tape where there
are no signals such as at unrecorded portions of the tape. In
this case, press [NAVI]

(4)

at a portion of the tape where a

programme has been recorded of this VCR. This will allow
signal checking to be performed more reliably. When a
signal is still not found, [CAN NOT FIND JET NAVIGATOR
DATA.] is displayed on the TV and you cannot find the
beginning of the programme.

• Up to 20 cassettes and 50 programmes can be registered.
• If 50 recorded programme data are already stored in

memory and you attempt to store timer recording data for
another programme, the message [REMAINING
PROGRAMME 0. DELETE JET NAVIGATOR DATA.]
appears. If you attempt to make a new recording, this same
message also appears after you insert the cassette and the
Jet Navigator data is checked. As each timer recording or
manual recording is finished, the programme data is deleted,
starting from the oldest data.

• When a new programme is attempted to be recorded after

programmes equivalent to 20 cassettes are already stored in
memory, [REMAINING CASSETTE 0. FOR JET
NAVIGATOR.] is displayed. Programmes recorded without
deleting data as instructed are not registered in the list.

END : MENU

SELECT : NAVI,

JET NAVIGATOR

DATE CH

CATEGORY

1 0 / 1 8

1 0 :3 0

M U S I C

1 0 / 1 9 2 4 1 5 :0 0 S P O R T
1 0 / 2 1

22 :1 5

1 0 / 2 3 A 2

20 :0 2