12
LSQT0871
Recording from an external source
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.
Preparations
• Connect a video movie camera or another VCR to this VCR
as shown.
• Display the VCR picture on the TV.
• Insert the cassette on which the copying is to be performed,
and make sure that its erasure prevention tab is not broken
out.
• Select the audio/video source required by pressing
[INPUT SEL]
(6)
to set A1 or A2.
A1:
Through the AV1 (AUDIO IN/VIDEO IN) sockets.
A2:
Through the AV2 (AUDIO IN/VIDEO IN) sockets on
front panel.
• Use the L and R connectors for operations in the normal
(monaural) mode.
Operations
1 Press [PLAY]
(8)
to start playback.
2 At the point where you want to join a new scene, press
[PAUSE/SLOW]
(29)
to put it in the still playback
mode.
3 Press [REC]
(15)
to put it in the recording pause mode.
4 Start playback on the source unit and search for the
point from which you want to record (copy) onto this
VCR.
5 When that point is reached, press [PAUSE/SLOW]
(29)
again to start recording the new picture and sound
from the playback unit.
6 To record (copy) additional scenes, press [PAUSE/
SLOW]
(29)
to put this VCR in the recording pause
mode and then perform above steps 4 and 5 again.
7 At the point where you want to stop recording, press
[STOP]
(12)
to finish recording.
Note:
• If you leave the VCR in the recording pause mode for more
than 5 minutes in step
3
or
6
, the VCR automatically
switches over to stop mode to protect the video heads.
To Delete all of a Cassette’s
Contents (Tape Refresh Function)
You can delete a cassette contents (the picture, the sound
and the Jet Navigator data) all at once.
Operations
1 Be sure to set [JET NAVIGATOR] to [ON] when you
want to delete all contents of a cassette that is
recorded while setting [JET NAVIGATOR] to [ON].
Be sure to set [JET NAVIGATOR] to [OFF] when you
want to delete all contents of a cassette that is
recorded while setting [JET NAVIGATOR] to [OFF] or is
recorded on another VCR. (See page 8.)
2 Insert a cassette that you want to delete the cassette
contents.
3 Press [MENU]
(9)
to display the Main menu on the
screen.
4 Press [
43
]
(28)
to select the
[TAPE REFRESH], and then press
the [ENTER]
(26)
.
5 Press [ENTER]
(26)
for
2 seconds or more to
start the tape refresh
function.
• When the tape refresh
function is working, the
remaining tape time
appears on the VCR
display.
The tape is rewound to the beginning, and it is fast-forwarded
with the tape refresh function.
When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
Note:
• When a video cassette with a broken off erasure prevention
tab is inserted, this function is not activated.
/ I
VIDEO IN
L–AUDIO IN–R
AV 2
AUDIO
R
VIDEO
L
OUT
IN
(
AV1
)
(2)
(1)
(3)
(1) AV 1
(VIDEO IN
(42)
/AUDIO IN
(45)
)
(2) AV 2
(VIDEO IN
(35)
/AUDIO IN
(36)
)
(3) Other VCR or Video movie
camera
Recording VCR
/ I
VIDEO IN
CH
L–AUDIO IN–R
AV 2
(1)
¢
(1) Other VCR or Video movie
camera
¢
Audio Cable (Not supplied)
T A P E R E F R E S H
S T A R T :
E N T E R
E N D : S T O P
T A P E R E F R E S H
E N D : S T O P
SP
SP
REMAIN
LSQT0871_Eng.book 12 ページ ２００５年２月１６日 水曜日 午後３時３９分
