Panasonic NV-HV61EB Скачать руководство пользователя страница 38

Страница: 38 / 40

Before requesting service

Please follow the instructions as given on the display.

I HAVE AN ON SCREEN MESSAGE.

You have attempted to carry out a function, which is not possible at this time.
It may be that no tape is inserted and you have pressed

PLAY

or that you

tried to change the details of a timer recording whilst it was being carried out.

THE VCR DISPLAY IS NOT ILLUMINATED.

The AC mains lead has become disconnected

Connect mains lead securely.

THE DISPLAY IS LIT, BUT THE VCR CANNOT BE OPERATED.

The VCR is in timer recording mode.

Press

TIMER

to cancel the mode.

Safety devices are operating.

Disconnect the mains, wait for 1 minute and reconnect.
If problem persists, consult service engineer.

VCR PICTURE DOES NOT APPEAR ON THE SCREEN.

If connected via RF

Check RF output channel and adjust if necessary. (See page 18.)

If connected via SCART

Check connections and choose appropriate AV channel on TV.

AUTO CLOCK SETTING DOES NOT OPERATE.

Teletext information is not available or cannot be read.

Set the clock manually. (See page 36 for details.)

THE PLAYBACK PICTURE IS DISTORTED, BLACK AND WHITE

OR HAS HORIZONTAL NOISE BARS.

The tracking adjustment is not correct.

Adjust the tracking. (See page 21.)

The playback channel on the TV has not been tuned properly.

THE PICTURE OF A RECORDED PROGRAMME IS DISTORTED OR

MISSING.

The aerial or connection is defective

Check connections and reconnect as necessary.

No programme was recorded because the VCR is not tuned correctly.

Re-tune the VCR.

Incorrect programme position was selected.

Select correct channel.

TIMER RECORDING DOES NOT OPERATE CORRECTLY.

Time and date were not set correctly.

Re-set correctly.

The start or finish time was not set correctly.

Re-set correctly.

The VCR was not put into timer recording mode.

Put VCR into timer recording mode.

RECORDING FROM AN EXTERNAL SOURCE IS NOT POSSIBLE.

The incorrect AV input was selected.

Check which AV input is in use and select this on the VCR.

The cables are not connected properly.

Check connections and adjust as necessary.

THE REMOTE CONTROL DOES NOT OPERATE CORRECTLY.

The remote signal cannot reach the VCR.

Point the remote at the front of VCR and make sure that there are no
objects in the way.

The remote is too far from the VCR

Move closer to the VCR or replace the batteries.

The batteries have been inserted incorrectly.

Insert the batteries correctly.

Re-tune the TV.

The video heads may be worn or clogged.

Try to playback a new tape.

Please contact our after sales service centre if you fail to remove problems by yourself

(see Guarantee Information).

Содержание NV-HV61EB









































Результаты поиска

Содержание NV-HV61EB

Отзывы:

Похожие инструкции для NV-HV61EB

Бренды по названию

Популярные бренды

Panasonic NV-HV61EB, Руководство по эксплуатации

Результаты поиска

Содержание NV-HV61EB

Отзывы:

Похожие инструкции для NV-HV61EB

Бренды по названию

Популярные бренды