Panasonic NV-HS960 Скачать руководство пользователя страница 24

Страница: 24 / 64

Press the OK button

again to conclude the

settings.

≥

To programme additional
timer recordings, repeat
operation steps

–

Press the TIMER REC button

to switch the VCR

over to the timer recording standby mode.

≥

Check that “

” is lit on the VCR display.

If it is flashing, check the timer recording details
again. (See page 26.)

If “– –” Appears under “Pos/Name” after
Entering a ShowView Number

Pos/Name stands for Programme Position/TV Station Name.
Normally, the name of the TV station or the number of the
programme position is displayed under “Pos/Name”.
However, if the TV station information was not automatically
set during Preset Download or Auto Setup due to adverse
reception conditions, the “– –” indication appears instead.
In such a case, follow the operation steps below to correct it.

Press the Channel buttons

repeatedly to select the programme
position on which the TV programme
to be recorded will be broadcast.

After you have entered the information of a TV station, it
remains stored in the VCR’s memory, and you do not need to
enter it again in the future.

To Suspend the Timer Recording Standby
Mode

See the previous page.

Note:

≥

If the VCR is not put in the timer recording standby mode at
the latest 10 minutes before the programmed timer
recording starting time, the “

” indication flashes on the

VCR display. In this case, press the TIMER REC button

to put the VCR in the timer recording standby mode.

To Programme with the
ShowView Function

The ShowView numbers assigned to each TV programme
and published alongside the TV programme listings in
newspapers and magazines make it extremely easy to set the
VCR for timer recording.
The duration of a timer recording programmed with
ShowView number may be slightly longer than the actual
duration of the TV programme.

Preparations

≥

Confirm that the VCR is on.

≥

Confirm that the TV is on and the VCR viewing channel is
selected.

≥

Insert a video cassette with an intact erasure prevention
tab.
As soon as the cassette is inserted, the Cassette Number
Check starts. Wait a few moments until it is completed.
(See page 16.)

≥

Set the VCR/TV switch

to “VCR”.

Example:

Programming a timer recording of a TV programme with the
ShowView number 920126

Operations

Press the SHOW VIEW button

to display the

menu for entering the ShowView number on the TV.

Press the Numeric buttons

to enter the

ShowView number.

≥

If you have entered a
wrong digit, press the
Cursor button (

)

and

then enter the correct digit.

Press the OK button

to display the programmed

content.

Press the SP/LP button

to set the desired tape

speed.

≥

SP provides standard
recording time and optimum
picture quality.
LP provides double
recording time with slightly reduced picture quality.
EP provides triple recording time with slightly
reduced picture quality.
Regarding the “A” indication, refer to page 25.

≥

To extend the ending time or to make any
corrections, use the Cursor buttons (

3421

)

the Channel buttons

, the DATE button

;

, the ON

button

, the OFF button

, the SP/LP button

≥