25
Setting the VCR’s Clock
When [
Россия
] (Russia) is selected in the Country setting
menu, the [AUTO] field does not appear on Clock setting
menu.
To Manually Adjust the Clock
Press the [MENU] button to display the Main menu on
the TV screen.
Press the [Cursor] buttons
34
to select [Clock setting].
Press the [OK] button to display
the Clock setting menu on the
TV screen.
Confirm that [Clock setting] is set to [MAN.], and then
press the [OK] button.
Use the [Cursor] buttons
3421
to set the date and
time.
– Instead of the [Cursor] buttons
3421
, you can also
use the [Numeric] buttons to set the date and time.
Press the [OK] button to conclude the setting.
Press the [EXIT] button to exit the On Screen Display.
To Activate the Automatic Time Correction
Function
If a TV station transmits a signal for time setting, performing
the operation steps below activates the Automatic time
correction function and the time is corrected automatically.
Press the [MENU] button to display the Main menu on
the TV screen.
Press the [Cursor] buttons
34
to select [Clock setting].
Press the [OK] button to display
the Clock setting menu on the
TV screen.
Press the [Cursor] buttons
34
to set [Clock setting] to
[AUTO].
Press the [OK] button to conclude the setting.
– Under adverse reception conditions, etc., the
Automatic time correction function may not work. In
this case, the indication for [Clock setting] is
automatically reset to [MAN.].
If the reception conditions improve later on, it may be
possible to activate this function.
Press the [EXIT] button to exit the On Screen Display.
Hints:
– If [Clock setting] is set to [AUTO] when you open the Clock
screen, do not set it to [MAN.], otherwise, the automatic
time correcting function is deactivated.
– The built-in clock employs the 24-hour system.
– In case of a power failure, an automatic back-up system
automatically maintains the operation of the clock for
approximate 60 minutes.
– When [Clock setting] is set to [AUTO], the automatic time
correction function checks and if necessary adjusts the time
several times every day.
The automatic time correction function only works when the
VCR is switched off; it does not work in the timer recording
standby mode.
– If [Clock setting] is set to [MAN.] and [Power save] to [ON]
(see page 26), the time may not be maintained correctly. In
this case, manually adjust the clock.
– If [Clock setting] is set to [AUTO] and [Power save] to [ON],
the Automatic time correction function does not work while
the VCR is turned off. However, as soon as it is turned on,
the Automatic time correction function is activated and the
clock is set correctly.
: AUTO
: 20:30:24
: 16.10.05
Clock setting
Time
Date
Panasonic VCR
Clock setting
: MAN.
: 20:30:24
: 16.10.05
Clock setting
Time
Date
Panasonic VCR
Clock setting
OK
OK
OK
EXIT
EXIT
OK
OK
MENU
MENU